Most common failures | No# failures |
---|
Headlamp aim out of alignment | 21 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Registration plate issues | 9 |
Registration plate lamp issues | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Horn not working (7.7 (a) (ii)) | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Horn not working |1.7.3a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Vehicle identification number not displayed (0.2 (a)) | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 2 |
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 2 |
Offside Front Lower Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front position lamp incorrect colour |1.1.2a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Central Front Lower Exhaust has a major leak of exhaust gases joint at collector box leaking (6.1.2 (a)) | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Stop lamp damaged and function impaired Bulb blown and replaced at station |1.3.3a| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Chain guard insecure (6.1.7 (i)) | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp does not illuminate immediately a brake applies not working on front or rear brake may be jammed on |1.3.1a| | 1 |
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Front shock absorber seal failed and leaking oil rust chip on leg |2.3.3| | 1 |
Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
Centre Rear Upper Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Centre Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Brake hose damaged | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Drive chain excessively tight at tight spot |6.2.1d| | 1 |
Drive chain worn to excess Has tight spot |6.2.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Rear Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp does not illuminate by the operation of both brake controls foot switch (4.3.2 (a) (iii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Fuel pipe leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
Exhaust has a major leak of exhaust gases centre joint split (6.1.2 (a)) | 1 |