Most common failures | No# failures |
---|
Headlamp aim out of alignment | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
Exhaust mounting does not fully support the exhaust system silencer loose |7.1.1.c| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Registration plate issues | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Brake hose damaged | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |