| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 18 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Registration plate issues | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Nearside Rear Footrest missing |6.2.1a| | 5 |
| Offside Rear Footrest missing |6.2.1a| | 5 |
| Rear Footrest missing |6.2.1a| | 5 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Rear Position lamp not working (4.2.1 (a)) | 4 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front suspension assembly component loose |2.3.1| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Drive chain excessively tight |6.2.1d| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear suspension component cracked |2.4.A.1a| | 1 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Fuel cap ineffective seal split in various places (6.1.3 (b) (i)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Offside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Offside Brake reaction bracket insecure |3.2.A1j| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Brake drum|s| insecure |3.2.A1g| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Upper Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Central Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Footrest missing both |6.2.1a| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Front Front wheel spindle loose |2.3.3a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Brake locking device missing |3.2.A1e| | 1 |
| Front Wheel spoke excessively bent |4.2.1b| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |