Most common failures | No# failures |
---|
Headlamp aim out of alignment | 24 |
Registration plate issues | 15 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Horn not working |1.7.3a| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp does not emit a steady light |1.3.1b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering control fouling between components which interferes with the free movement of the steering Hitting petrol tank |2.1.2a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Brake fluid reservoir leaking hydraulic fluid (3.2.B1e) | 1 |
Rear Floor brake test indicates a binding brake (3.3.C2c) | 1 |
Inner Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Lower Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Inner Rear Lower Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
An item not tested |Manual| | 1 |
Handlebar excessively deformed |2.2.1 |c| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Footrest missing |6.2.1a| | 1 |
Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Brake linked system has a seized caliper pivot. |3.2.B5| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Fuel pipe leaking |6.1.3 |b| |i|| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Registration plate lamp issues | 1 |
Indicator switch defective |1.5.4| | 1 |
Vehicle identification number not permanently displayed (6.3.5a) | 1 |
Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Front Stop lamp does not emit a steady light (1.3.1b) | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Rear Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Offside Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp switch with a delay in operation from front brake lever |4.3.2 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Fuel system component leaking from carbs |6.1.3 |b| |i|| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Front Brake component leaking fluid |3.2.B4| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Direction indicator not working all |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pipe excessively damaged |3.2.B2a| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Front Horn not working |1.7.3a| | 1 |