>

MOT History from tests of petrol SUZUKI GSs year 2008

Review the list of common SUZUKI GS failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history
Pass percent:82.46%
(The average a petrol SUZUKI GS year 2008 passes without issue)
Based on:1,705 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment55
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|18
Drive chain excessively loose |6.2.1d|17
Rear reflector on motorcycle missing |1.4.1|9
Handlebar deformed |2.1.1b|8
Horn not working |1.7.3a|7
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Front Stop lamp remains on when the brake is released |1.3.1e|6
Stop lamp remains on when the brakes are released6
Nearside Front shock absorber seal failed and leaking oil |2.3.3|6
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))5
Drive chain excessively tight |6.2.1d|5
Steering movement excessively `notchy` with the wheel raised |2.2.1b|5
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Front Stop lamp not working (4.3.1 (a) (ii))5
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||5
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|4
Rear Drive chain excessively loose |6.2.1d|4
Headlamp not working on dipped beam (4.1.1 (a) (ii))4
Rear reflector missing (4.8.2 (a) (ii))4
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))4
Rear Brake disc|s| excessively worn |3.2.A1l|4
Offside Front shock absorber seal failed and leaking oil |2.3.3|4
Steering headbearing has excessive free play |2.2.2|4
Drive chain excessively loose (6.1.7 (c) (i))3
Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a||3
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Front Floor brake test indicates a binding brake |3.3.C2c|3
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|3
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||3
Drive chain excessively loose |6.1.7 |c| |i||3
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))3
Rear Brake disc|s| excessively scored |3.2.A1l|3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))3
Drive chain worn to excess |6.2.1e|3
Front Brake lever cannot be applied smoothly |3.1.3d|3
Rear Hydraulic brake control feels spongy |3.1.4a|3
Registration plate issues3
Centre Rear reflector on motorcycle obscured |1.4.1|2
Rear Stop lamp not working (4.3.1 (a) (ii))2
Front Position lamp not working (4.2.1 (a))2
Front Roller brake test indicates a severely grabbing brake |3.3.A1b|2
Rear Brake disc significantly and obviously worn disc worn/ brake judder on rear when carrying out brake performance checks (1.1.14 (a) (i))2
Headlamp not working on main beam (4.1.1 (a) (ii))2
Front Brake excessively binding (1.2.1 (f))2
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))2
Offside Front Direction indicator insecure |1.5.3b|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Offside Front Direction indicators not working |1.5.1c|2
Headlamp aim not tested (4.1.2 (b))2
Rear Brake disc|s| has excessive run out |3.2.A1m|2
Front wheel bearings have excessive free play |2.3.5b|2
Rear reflector missing |4.8.2 |a| |ii||2
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|2
Front Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|2
Horn not working |7.7 |a| |ii||2
Rear Brake pedal has inadequate reserve travel |3.1.3b|2
Front Brake master cylinder fluid level dangerously low |3.2.B1d|2
Fuel system component leaking (6.1.3 (b) (i))2
Drive chain worn to excess |6.1.7 |c| |i||2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Stop lamp remains on when the brake is released |1.3.1e|2
Horn not working (7.7 (a))2
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||2
Rear Drive chain excessively tight |6.2.1d|2
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Stop lamp remains on when the brake is released from front lever |1.3.1e|1
Front Throttle operating incorrectly |6.2.1f|1
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Rear Drive chain worn to excess |6.2.1e|1
Headlamp aim not tested dip beam not working (4.1.2 (b))1
Nearside Rear Footrest missing (6.2.12 (a))1
Rear Stop lamp switch with a delay in operation goes off when full down (4.3.2 (a) (ii))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i))1
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))1
Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))1
Central Front Shock absorber has negligible damping effect forks low on suspension oil (5.3.2 (b))1
Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii))1
Front Front position lamp flickers when tapped lightly by hand |1.1.3c|1
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Brake pedal has inadequate reserve travel |3.1.3b|1
Nearside Front Direction indicators not working |1.5.1c|1
Front Valve stem seriously damaged |5.2.3 |j||1
Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Upper Steering control handlebar movement restricted by taut cables |2.1.2c|1
Rear Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Upper Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine cradle. (6.1.1 (c) (i))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Front position lamp incorrect colour |1.1.2a|1
Throttle operating incorrectly |6.2.1f|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Drive chain sprocket excessively loose (6.1.7 (c) (i))1
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||1
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii||1
Front Position lamp not working |4.2.1 |a||1
Throttle operating incorrectly |6.2.7 |a| |i||1
Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Offside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Stop lamp remains on when the brake is released |1.3.1e|1
Motorcycle structure excessively corroded front frame engine mount area |6.1.1a|1
Rear reflector on motorcycle incorrectly positioned |1.4.2d|1
Fuel system component leaking RHS CARBURETOR (6.1.3 (b) (i))1
Fuel cap ineffective |6.1.3 |b| |i||1
Nearside Fuel system component leaking |6.1.3 |b| |i||1
Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front Front shock absorber seal failed and leaking oil Both fork seals blown, O/S is worse and appears to be very little oil in both forks. |2.3.3|1
Inner Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Rear Stop lamp does not illuminate by the operation of both brake controls REPLACED BULB (4.3.2 (a) (iii))1
Horn not working (7.7 (a) (ii))1
Front Horn control not functioning. |1.7.2b|1
Offside Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii))1
Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Rear Brake disc fractured (1.1.14 (a) (ii))1
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))1
Horn control not functioning. |1.7.2b|1
Nearside Front Direction indicator not working |1.5.1c|1
Drive chain sprocket worn to excess |6.2.1e|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Front Shock absorber has negligible damping effect |5.3.2 |b||1
Front wheel bearings are excessively rough |2.3.5b|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Front Brake grabbing severely (1.2.1 (c))1
Shock absorber has a serious fluid leak both front forks |5.3.2 |b||1
Central Front Upper Handlebar so insecure it is likely to become detached |2.2.1 |b| |ii||1
Central Front Upper Horn not working |7.7 |a| |ii||1
Offside Front Upper Brake fluid not visible |1.1.10 |d| |iii||1
Rear Brake excessively binding (1.2.1 (f))1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Exhaust mounting missing |7.1.1c|1
Front Suspension insecurely attached |5.3.3 |a| |i||1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Throttle operating incorrectly grip loose |6.2.1f|1
Offside Rear Direction indicator not working |1.5.1c|1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))1
Handlebar mounting insecure (2.2.1 (a) (i))1
Rear reflector missing Original covered by L plate. |4.8.2 |a| |ii||1
Headlamp aim not tested |1.6|1
Rear reflector on motorcycle obscured |1.4.1|1
Rear Footrest missing |6.2.1a|1
Lower Steering headbearing has excessive free play |2.2.2|1
Front suspension assembly component loose |2.3.1|1
Headlamp insecure |1.2.3b|1
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Front Lower Steering headbearing has excessive free play |2.2.2|1
Rear Rear reflector on motorcycle damaged and function impaired |1.4.2a|1
Floor brake test indicates a sticking brake |3.3.C2c|1
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Headlamp damaged and function impaired |1.2.3a|1
Rear Brake pedal insecure (1.1.2 (e) (i))1
Shock absorber insecurely attached bolt for linkage to frame loose |5.3.2 |a| |i||1
Suspension component mounting modified so the suspension is inoperative non standard rear shock fouling swingarm and does not compress correctly |5.3.3 |c| |ii||1
Drive chain excessively loose fouling on centre stand |6.1.7 |c| |i||1
Rear Shock absorber has negligible damping effect |5.3.2 |b||1
Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Throttle operating incorrectly sticking on offside full lock (6.2.7 (a) (i))1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Central Front Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Exhaust excessively deteriorated |7.1.1a|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Rear Chain guard insecure |6.2.1c|1
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Drive chain worn to excess (6.1.7 (c) (i))1
Front Brake lever cracked |3.1.2c|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Front Handlebar deformed |2.1.1b|1
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Nearside Front Inner Suspension arm corroded and seriously weakened The inner side of the front left side of the swinging arm is holed from corrosion. (5.3.3 (b) (i))1
Central Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Handlebar mounting clamp loose |2.1.1a|1
Handlebar retaining device loose |2.2.1 |b| |i||1
Headlamp aim beam image kick up to the offside |1.6|1
Front Direction indicator missing |1.5.1a|1
Front Stop lamp does not illuminate immediately a brake applies Replace front brake light switch |1.3.1a|1
Front Engine mounting/bracket excessively loose engine mount nut missing |6.1.8 |a| |ii||1
Front Stop lamp not working |4.3.1 |a| |ii||1
Front Horn not working (7.7 (a))1
Drive chain fouling another component |6.2.1d|1
Handlebar mounting clamp bolt loose |2.1.1a|1
Rear position lamp insecure |1.1.1c|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c))1
Front Brake cylinder leaking |1.1.16 |b| |i||1
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii||1
Rear Stop lamp lens defective such that the emitted light is adversely affected |4.3.1 |b| |ii||1
Throttle operating incorrectly STICKING |6.2.7 |a| |i||1
Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i||1
Front Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced FRONT ENGINE MOUNT |6.1.1 |c| |i||1
Front Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Front Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Offside Headlamp insecure mount bolt loose (4.1.1 (c))1
Headlamp insecure (4.1.1 (c))1
Drive chain horseshoe locking device likely to become detached clip link missing (6.1.7 (j) (ii))1
Front Steering lock stop missing |2.1.3|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Fuel cap missing key missing unable to gain access |7.2.2a|1
Brake hose damaged1
Front Upper Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Throttle operating incorrectly (6.2.7 (a) (i))1
Riders seat insecure (6.2.5 (a) (ii))1
Front Brake lever has insufficient reserve travel |1.1.2 |a||1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy