| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 21 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Registration plate issues | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Front Brake lagging in operation (1.2.1 (d)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Centre Front Front position lamp insecure |1.1.1c| | 1 |
| Offside Steering lock stop maladjusted |2.1.3| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Centre Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure adjuster nut loose |5.3.3 |a| |i|| | 1 |
| Centre Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Offside Front Lower Fuel tank leaking |7.2.1a| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front Front suspension assembly component loose |2.3.1| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear Rear position lamp insecure |1.1.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
| Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Front Headlamp incorrect colour |1.2.1| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Horn not working |1.7.3a| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Front Brake lever pivots excessively worn |3.1.3a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Plate brake test indicates a severely grabbing brake |3.3.B1b| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Brake component has an inadequate repair |3.1.5| | 1 |
| Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride caliper retaining bolt loose |6.2.1h| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Rear Suspension component pin or bush excessively worn lower linkage bearings (5.3.4 (a) (i)) | 1 |
| Drive chain excessively loose chain is also worn (6.1.7 (c) (i)) | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Registration plate lamp issues | 1 |
| Stop lamp(s) not working from front control (4.3.1 (a) (ii)) | 1 |
| Fuel system component leaking excessively or a risk of fire leaking from n/s exhaust joint (6.1.3 (b) (ii)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |