Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Registration plate issues | 16 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Horn not working |1.7.3a| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Drive chain excessively loose |6.2.1d| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Brake hose excessively deteriorated | 5 |
Riders seat insecure |6.2.1a| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Headlamp insecure |1.2.3b| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Front Footrest insecure |6.2.1a| | 3 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Fuel system component leaking |7.2.1a| | 2 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear parking brake recording little or no effort | 2 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Fuel tank leaking |7.2.1a| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Offside Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Brake hose damaged | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Brake lever has restricted free movement No reserve travel |1.1.15 |e|| | 1 |
Steering headbearing has excessive wear or free play Knotch |2.2.2 |f| |i|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Outer Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Front Riders seat insecure |6.2.1a| | 1 |
Throttle operating incorrectly cable slack at control grip |6.2.1f| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Fuel system component leaking |6.1.3 |b| |i|| | 1 |
Rear Brake locking device missing ACHOR ARM |3.2.A1e| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake hose leaking fluid |3.2.B4| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Nearside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Brake pipe excessively corroded | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Brake locking device insecure front nearside brake disc bolts |3.2.A1e| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied hitting exhaust |3.1.3c| | 1 |
Brake locking device insecure rear brake pedal adjuster insecure |3.2.A1e| | 1 |
Brake locking device missing rear caliper brace bar bolts |3.2.A1e| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link |6.2.1h| | 1 |
Offside Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake fluid reservoir fluid level dangerously low empty |3.2.B1d| | 1 |
Brake component leaking fluid rear caliper |3.2.B4| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Suspension component mounting modified so the suspension is likely to fail other components rear wheel axle fouling silencer |5.3.3 |c| |ii|| | 1 |
Dipswitch does not operate immediately when selected on dipped beam high beam and dip beam not operating correctly |4.1.3 |b|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Stop lamp does not illuminate immediately a brake applies stop switch not working -------connections cleaned and remade |1.3.1a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front Exhaust is leaking and excessively noisey HEADER JOINT |7.1.1b| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Wheel spoke excessively corroded |4.2.1b| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Rear Brake component leaking fluid |3.2.B4| | 1 |