Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Registration plate issues | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Drive chain excessively loose |6.2.1d| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Headlamp switch faulty |1.2.4| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear Wheel spoke missing |4.2.1b| | 4 |
Horn not working |1.7.3a| | 4 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 3 |
Rear Wheel spoke excessively loose |4.2.1b| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 3 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Motorcycle structure excessively corroded |6.1.1a| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Stop lamp missing |1.3.3a| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Front Stop lamp does not emit a steady light |1.3.1b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear suspension component loose |2.4.A.1a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Wheel spoke cracked. |4.2.1b| | 2 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
An item not tested |Manual| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. Swingarm rusted |2.4.A.2d| | 1 |
Nearside Front Front wheel has a missing wheel bolt|s| |4.2.3a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Horn not working |1.7.3a| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Suspension component attachment bracket/mounting corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Central Rear Motorcycle structure excessively corroded swingarm |6.1.1a| | 1 |
Offside Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Lower Steering linkage locking device missing wheel spindel pinch bolt |2.1.3 |d|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Chain guard fouling another component |6.2.1c| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Nearside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Front Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Rear Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Outer Upper Direction indicators not working |1.5.1c| | 1 |
Centre Front Upper Horn not working |1.7.3a| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front suspension assembly component loose |2.3.1| | 1 |
Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Brake linked system has a seized caliper pivot. |3.2.B5| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Rear Brake back plate insecure (1.1.14 (d)) | 1 |
Rear Stop lamp not working switch connectioncleaned (4.3.1 (a) (ii)) | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Offside Upper Front suspension assembly component loose top yoke fork pinch bolt |2.3.1| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear suspension component cracked |2.4.A.1a| | 1 |
Inner Front Upper Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Built up wheel has a loose bolt/s Wheel nut insecure |4.2.1c| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Rear Brake locking device insecure Rear brake ankor nut loose! |3.2.A1e| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |