Most common failures | No# failures |
---|
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Headlamp aim out of alignment | 6 |
Registration plate issues | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Horn control defective |1.7.2a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Brake locking device insecure torque arm rear nut |3.2.A1e| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Brake fluid contaminated (1.8 (a)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Rear suspension component excessively bent |2.4.A.1a| | 1 |
Offside Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp remains on when the brake is released lever brake |1.3.1e| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced swinging arm (6.1.1 (c) (i)) | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Rear Wheel fixing missing |single fixing| |5.2.1 |a| |ii|| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |