Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain excessively loose |6.2.1d| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Upper Fork yoke modification unsafe doesnt clamp forks |2.2.2 |e|| | 1 |
Nearside Front Shock absorber has a serious fluid leak fork seal |5.3.2 |b|| | 1 |
Upper Engine mounting/bracket bracket excessively loose |6.1.8 |a| |ii|| | 1 |
Front Motorcycle structure is fractured and structural rigidity is significantly reduced mud gaurd |6.1.1 |a| |i|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link clip fitted wrong way round |6.2.1h| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Horn is not a constant note |1.7.3c| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Registration plate issues | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |