| Most common failures | No# failures |
|---|
| Registration plate issues | 16 |
| Rear reflector on motorcycle missing |1.4.1| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Headlamp aim out of alignment | 7 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Rear Wheel spoke excessively loose |4.2.1b| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Horn missing |1.7.1| | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Horn not working |1.7.3a| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Drive belt sprocket worn to excess |6.2.1e| | 1 |
| Rear Drive belt sprocket worn to excess |6.2.1e| | 1 |
| Nearside Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Brake hose excessively deteriorated | 1 |
| Brake hose damaged | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Headlamp missing |1.2.3a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Offside Front Stop lamp missing |4.3.1 |a| |ii|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Stop lamp remains on when the brake is released Rear switch mechanism |1.3.1e| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Front Lower Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |