Most common failures | No# failures |
---|
Headlamp aim out of alignment | 54 |
Exhaust is leaking and excessively noisey |7.1.1b| | 46 |
Steering headbearing has excessive free play |2.2.2| | 33 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 32 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 24 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 17 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 16 |
Registration plate issues | 16 |
Handlebar mounting clamp bolt loose |2.1.1a| | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 13 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 12 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 10 |
Front Steering headbearing has excessive free play |2.2.2| | 10 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 10 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 10 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 10 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 9 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 9 |
Front wheel bearings are excessively rough |2.3.5b| | 8 |
Nearside Rear Direction indicator not working |1.5.1c| | 8 |
Horn not working |1.7.3a| | 7 |
Riders seat insecure |6.2.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 6 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 6 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 5 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Nearside Rear Direction indicator insecure |1.5.3b| | 5 |
Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Direction indicators not working |1.5.1c| | 5 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 4 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 4 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Steering linkage has excessive free play |2.2.2| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 3 |
Nearside Rear Direction indicators not working |1.5.1c| | 3 |
Nearside Rear Direction indicator missing |1.5.1a| | 3 |
Offside Steering lock stop ineffective |2.1.3| | 3 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Brake pipe excessively corroded | 3 |
Offside Rear Direction indicator insecure |1.5.3b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
Headlamp aim not tested |1.6| | 3 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Rear Direction indicator insecure |1.5.3b| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Indicator switch defective |1.5.4| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Front Headlamp insecure |1.2.3b| | 3 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Rear wheel rotation likely to be impeded |6.2.1b| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 2 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear position lamp incorrect colour |1.1.2b| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Brake performance not tested |3.3| | 2 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Handlebar deformed |2.1.1b| | 2 |
Rear Direction indicator damaged and function impaired |1.5.3a| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Offside Direction indicators not working |1.5.1c| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Rear Motorcycle structure excessively damaged |6.1.1a| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Brake caliper|s| insecure |3.2.A1j| | 2 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Offside Front Steering lock stop ineffective |2.1.3| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Rear Brake pipe inadequately supported |3.2.B2b| | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Steering lock stop ineffective |2.1.3| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Offside Steering lock stop missing |2.1.3| | 2 |
Rear position lamp damaged and function impaired |1.1.1b| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |