MOT History from tests of petrol SUZUKI AN650s year 2006

Review the list of common SUZUKI AN650 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:90.32%

(The average a petrol SUZUKI AN650 year 2006 passes without issue)

Based on:372 MOT Tests

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Headlamp aim out of alignment	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Brake excessively binding (1.2.1 (f))	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Registration plate lamp issues	1
Brake pipe excessively corroded	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Brake excessively binding (1.2.1 (f))	1
Offside Front Brake disc fractured (1.1.14 (a) (ii))	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))	1
Roller brake test indicates a binding brake \|3.3.A1a\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Offside Front Outer Roller brake test indicates a binding brake Roller brake tester indicates a binding front brake \|3.3.A1a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Brake excessively binding \|1.2.1 \|f\|\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Rear Shock absorber has a serious fluid leak Both rear shocks \|5.3.2 \|b\|\|	1
Rear Brake disc significantly and obviously worn \|1.1.14 \|a\| \|i\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Headlamp aim out of alignment	4
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	2
Front Brake excessively binding (1.2.1 (f))	2
Front Brake lever cannot be applied smoothly \|3.1.3d\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	2
Front All position lamps do not illuminate immediately when switched on \|1.1.3a\|	1
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Registration plate lamp issues	1
Brake pipe excessively corroded	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Brake excessively binding (1.2.1 (f))	1
Offside Front Brake disc fractured (1.1.14 (a) (ii))	1
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))	1
Roller brake test indicates a binding brake \|3.3.A1a\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Offside Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Offside Front Outer Roller brake test indicates a binding brake Roller brake tester indicates a binding front brake \|3.3.A1a\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	1
Front Brake excessively binding \|1.2.1 \|f\|\|	1
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Rear Shock absorber has a serious fluid leak Both rear shocks \|5.3.2 \|b\|\|	1
Rear Brake disc significantly and obviously worn \|1.1.14 \|a\| \|i\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1

MOT History from tests of petrol SUZUKI AN650s year 2006

Find us on Facebook