Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 42 |
Headlamp aim out of alignment | 15 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 13 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Registration plate lamp issues | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Offside Front Position lamp not working (4.2.1 (a)) | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Front Brake disc fractured (1.1.14 (a) (ii)) | 2 |
Brake pipe excessively corroded | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |
Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Rear Upper Exhaust mounting missing |7.1.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
Centre Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Stop lamp not working Front brake light switch faulty. |4.3.1 |a| |ii|| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Centre Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Stop lamp obscured |1.3.1c| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Brake disc missing Nearside caliper also missing (1.1.14 (c)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Shock absorber has negligible damping effect REAR AIR SUSPENSION COLLAPSED (5.3.2 (b)) | 1 |
Nearside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Offside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Nearside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Offside Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Stop lamp not working with l/hand leaver (4.3.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Lower Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Front position lamp incorrect colour Showing blue light. |1.1.2a| | 1 |
Offside Front Front position lamp incorrect colour Showing blue light. |1.1.2a| | 1 |
Registration plate issues | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Front Roller brake test indicates a binding brake unable to test front wheel bearings |3.3.A1a| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
An item not tested |Manual| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Brake lever has inadequate reserve travel rear |3.1.3b| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front Brake excessively binding unable to correctly check front wheel bearings due to seized brakes |1.2.1 |f|| | 1 |