MOT History from tests of petrol SUZUKI ANs year 1999

Review the list of common SUZUKI AN failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:88.39%

(The average a petrol SUZUKI AN year 1999 passes without issue)

Based on:336 MOT Tests

Most common failures	No# failures
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Front Brake disc\|s\| cracked \|3.2.A1g\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp aim out of alignment	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))	1
Front Rear position lamp damaged and function impaired \|1.1.1b\|	1
Fuel cap missing \|6.1.3 \|b\| \|i\|\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Nearside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	1
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Front Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
An item not tested \|Manual\|	1
Front Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a))	1
Rear Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	1
Centre Front Lower Brake disc\|s\| cracked \|3.2.A1g\|	1
Rear Plate brake test indicates a binding brake \|3.3.B1a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	3
Front Front wheel bearings are excessively rough \|2.3.5b\|	3
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	2
Front Brake disc\|s\| cracked \|3.2.A1g\|	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	2
Rear Shock absorber has negligible damping effect (5.3.2 (b))	2
Front Brake lever has inadequate reserve travel \|3.1.3b\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Headlamp aim out of alignment	2
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))	1
Front Rear position lamp damaged and function impaired \|1.1.1b\|	1
Fuel cap missing \|6.1.3 \|b\| \|i\|\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front Front wheel bearings have excessive free play \|2.3.5b\|	1
Nearside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Handlebar mounting excessively deteriorated \|flexible type\| \|2.1.1d\|	1
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Front Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
An item not tested \|Manual\|	1
Front Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a))	1
Rear Rear suspension fouling which affects the movement of the rear suspension \|2.4.A.3a\|	1
Centre Front Lower Brake disc\|s\| cracked \|3.2.A1g\|	1
Rear Plate brake test indicates a binding brake \|3.3.B1a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1

MOT History from tests of petrol SUZUKI ANs year 1999

Find us on Facebook