>

MOT History from tests of petrol SUPERBYKE POWERBANDs year 2007

Review the list of common SUPERBYKE POWERBAND failures below or to perform a specific mot history check on your SUPERBYKE then use our popular KnowYourCar service

mot history
Pass percent:55.77%
(The average a petrol SUPERBYKE POWERBAND year 2007 passes without issue)
Based on:208 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment12
Rear Brake lever has inadequate reserve travel |3.1.3b|11
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|10
Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Steering movement excessively `notchy` with the wheel raised |2.2.1b|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Steering headbearing has excessive free play |2.2.2|4
Rear reflector on motorcycle missing |1.4.1|4
Horn not working |1.7.3a|4
Nearside Brake lever has inadequate reserve travel |3.1.3b|4
Rear suspension bush has excessive free play |2.4.A2a|i||3
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Horn not loud enough to be heard by another road user |1.7.3a|3
Wheel alignment incorrect which adversely affects the steering |2.5.1|3
Front Brake lever has inadequate reserve travel |3.1.3b|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Throttle operating incorrectly |6.2.1f|3
Direction indicators not working |1.5.1c|3
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b|2
Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Fairings insecure and likely to impede the steering |2.1.2e|2
Exhaust mounting does not fully support the exhaust system |7.1.1.c|2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|2
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|2
Nearside Front Handlebar handgrip missing |2.1.1c|2
Rear Rear reflector on motorcycle missing |1.4.1|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i||2
Exhaust is leaking and excessively noisey |7.1.1b|2
Front Lower Steering headbearing has excessive free play |2.2.2|2
Front Upper Fairings insecure and likely to impede the steering |2.1.2e|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Nearside Front Direction indicator not working |1.5.1c|2
Rear Stop lamp remains on when the brake is released |1.3.1e|2
Front Front suspension assembly component excessively corroded. |2.3.1|2
Brake hose damaged2
Front Front shock absorber seal failed and leaking oil |2.3.3|2
Headlamp aim not tested |1.6|2
Handlebar mounting clamp bolt loose |2.1.1a|2
Brake hose excessively deteriorated1
Front Direction indicators not working |1.5.1c|1
Nearside Front Upper Steering control handlebar movement restricted by taut cables |2.1.2c|1
Stop lamp does not illuminate immediately a brake applies rear brake opperated stop light intermitant in opperation |1.3.1a|1
Stop lamp does not illuminate immediately a brake applies rear brake opperated stop light intermittent in opperation |1.3.1a|1
Front Direction indicator deteriorated and function impaired both |1.5.3a|1
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b|1
Offside Rear Direction indicator not working |1.5.1c|1
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a|1
Front wheel spindle securing nut|s| loose |2.3.5a|1
Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Nearside Direction indicators not working |1.5.1c|1
Offside Direction indicators not working |1.5.1c|1
Offside Front Upper Brake lever has inadequate reserve travel |3.1.3b|1
Rear Upper Rear reflector on motorcycle missing |1.4.1|1
Direction indicator incorrect colour |1.5.1b|1
Headlamp switch faulty |1.2.4|1
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Nearside Front Upper Brake lever has inadequate reserve travel |3.1.3b|1
Front Fairing insecure and likely to impede the steering |2.1.2e|1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Exhaust markings indicating not for road use or similar wording |7.1.4|1
Rear shock absorber insecurely mounted |2.4.A.3b|1
Rear Plate brake test indicates a binding brake |3.3.B1a|1
Rear wheel insecure |4.2.3b|1
Front Horn not working |1.7.3a|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Headlamp deteriorated and function impaired |1.2.3a|1
Front suspension assembly component loose |2.3.1|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Front Front suspension has inadequate damping effect. |2.3.6c|1
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Fuel system component insecure |7.2.1b|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Brake lever has inadequate reserve travel |3.1.3b|1
Front suspension has inadequate damping effect. |2.3.6c|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Lower Fork yoke deformed |2.1.1b|1
Rear Brake lever is inoperative |3.1.3c|1
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c|1
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Brake pedal cannot be released smoothly |3.1.3d|1
Rear Direction indicators not working |1.5.1c|1
All position lamps do not illuminate immediately when switched on |1.1.3a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Nearside Rear Direction indicator not working |1.5.1c|1
Offside Front Brake lever insecure |3.1.2a|1
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Direction indicator flashing more than 120 times per minute |1.5.1c|1
Rear wheel bearings have excessive free play |2.4.A.2c|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Front suspension has severe distortion of a load bearing member or its supporting structure. |2.3.8|1
Handlebar deformed |2.1.1b|1
Indicator switch insecure |1.5.4|1
Front Front mudguard insecure |2.3.7|1
Rear Front mudguard insecure |2.3.7|1
Front Steering lock stop maladjusted |2.1.3|1
Fuel system component leaking |7.2.1a|1
Offside Rear Direction indicator insecure |1.5.3b|1
Handlebar mounting clamp loose |2.1.1a|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Fuel cap does not fasten securely by a positive means |7.2.2b|1
Registration plate issues1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
An item not tested |Manual|1
Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front suspension assembly component excessively corroded. |2.3.1|1
Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Nearside Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy