Most common failures | No# failures |
---|
Headlamp aim out of alignment | 3 |
Registration plate issues | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Centre Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Brake component defective due to a deliberate modification which significantly reduces the original strength Rubber boot missing |3.1.5| | 1 |
Motorcycle structure excessively damaged Right hand side panel |6.1.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicator damaged and function impaired no lens |1.5.3a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front position lamp missing no bulb |1.1.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Built up wheel has a loose bolt/s rear caliper bolt lose |4.2.1c| | 1 |
Drive chain sprocket carrier worn to excess chain and sprockets plus wheel bearing |6.2.1e| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp not working with foot pedal |4.3.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Registration plate lamp issues | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies not working with front brakr lever |1.3.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected control loose on bars. (6.2.7 (a) (ii)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Brake hose damaged | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |