Most common failures | No# failures |
---|
Headlamp aim out of alignment | 10 |
Drive chain excessively loose |6.2.1d| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 4 |
Registration plate issues | 4 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 3 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Rear Footrest missing |6.2.1a| | 3 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Brake disc contaminated with oil from leaking fork seal |1.1.14 |b|| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Exhaust system insecure (6.1.2 (a)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Registration plate lamp issues | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Offside Front Shock absorber has a serious fluid leak leaked oil onto brake. |5.3.2 |b|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Rear wheel bearings have excessive free play this bike should not be used on the road because off the above. |2.4.A.2c| | 1 |
All position lamps light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Rear wheel has a missing wheel bolt|s| sprocket bolts |4.2.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Brake lever has restricted free movement |1.1.15 |e|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator deteriorated and function impaired less than 50% of led`s working |1.5.3a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear suspension bush has excessive free play swinging arm bushes worn |2.4.A2a|i|| | 1 |
Rear Brake caliper|s| insecure brake caliper pins badly worn |3.2.A1j| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Exhaust is leaking and excessively noisey silencer cracked |7.1.1b| | 1 |
Headlamp switch faulty on / off switch |1.2.4| | 1 |
Front Exhaust system insecure |6.1.2 |a|| | 1 |
Offside Front Brake lever insecure |1.1.2 |e| |i|| | 1 |
Nearside Front Headlamp aim headlamp deteriorated and function impaired bulb loose in holder |1.2.3a| | 1 |
Riders seat insecure bolt missing |6.2.1a| | 1 |
Rear suspension fouling which affects the movement of the rear suspension exhaust is rubbing |2.4.A.3a| | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Upper Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Nearside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever has insufficient reserve travel Brake lever pulls back to handle bar (1.1.2 (a)) | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Lower Stop lamp not working foot (4.3.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Brake lever insecure lock nut missing (1.1.2 (e) (i)) | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Exhaust mounting does not fully support the exhaust system exhaust loose at front and rear fixing points. |7.1.1.c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear suspension component loose rear swinging arm loose |2.4.A.1a| | 1 |
Rear suspension bush has excessive free play swinging arm |2.4.A2a|i|| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Brake performance not tested |3.3| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Front Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Central Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Brake hose excessively deteriorated | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake grabbing severely |1.2.1 |c|| | 1 |
Direction indicator affected by the operation of another lamp all indicators illuminate when headlamp is turned on |1.5.1c| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Wheel alignment incorrect which adversely affects the handling chain not adjusted squarely |2.5.1| | 1 |
Brake reaction bracket insecure has movement when braking, possibly due to incorrect wheel alignment or slightly loose rear wheel nut |3.2.A1j| | 1 |
Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Front Footrest insecure |6.2.12 |a|| | 1 |
Rear Brake disc insecure |1.1.14 |a| |ii|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
Centre Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Centre Front Upper Position lamp switch insecure |1.1.4b| | 1 |
Centre Rear Lower Rear position lamp insecure |1.1.1c| | 1 |
Central Front Horn control not functioning. |1.7.2b| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded caliper |3.2.A1h| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Horn not working |1.7.3a| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Front Brake lagging in operation |1.2.1 |d|| | 1 |