| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 66 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 45 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 27 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 25 |
| Registration plate issues | 24 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 24 |
| Rear reflector on motorcycle missing |1.4.1| | 24 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 23 |
| Nearside Rear Footrest missing |6.2.1a| | 22 |
| Drive chain excessively loose |6.2.1d| | 22 |
| Offside Rear Footrest missing |6.2.1a| | 18 |
| Drive chain worn to excess |6.2.1e| | 18 |
| Steering headbearing has excessive free play |2.2.2| | 17 |
| Horn not working |1.7.3a| | 17 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 14 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 13 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 12 |
| Rear Direction indicator incorrect colour |1.5.1b| | 12 |
| Front Direction indicator incorrect colour |1.5.1b| | 12 |
| Direction indicator incorrect colour |1.5.1b| | 11 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 11 |
| Nearside Rear Direction indicator not working |1.5.1c| | 11 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 10 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 10 |
| Front wheel bearings have excessive free play |2.3.5b| | 10 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 10 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 10 |
| Brake hose excessively deteriorated | 9 |
| Drive chain excessively tight |6.2.1d| | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 9 |
| Rear Footrest missing |6.2.1a| | 9 |
| Throttle operating incorrectly |6.2.1f| | 7 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 6 |
| Offside Front Footrest insecure |6.2.1a| | 6 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 6 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
| Direction indicators not working |1.5.1c| | 6 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
| Offside Rear Direction indicator not working |1.5.1c| | 6 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Indicator switch insecure |1.5.4| | 5 |
| Headlamp insecure |1.2.3b| | 5 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Front wheel bearings are excessively rough |2.3.5b| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 5 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
| Brake hose damaged | 5 |
| Offside Rear Direction indicators not working |1.5.1c| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Offside Front Direction indicator not working |1.5.1c| | 5 |
| Nearside Front Footrest insecure |6.2.1a| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Headlamp aim not tested |1.6| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 4 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
| Offside Handlebar deformed |2.1.1b| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 4 |
| Front Steering headbearing has excessive free play |2.2.2| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Position lamp switch insecure |1.1.4b| | 4 |
| Offside Front Direction indicators not working |1.5.1c| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Nearside Direction indicator incorrect colour |1.5.1b| | 4 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Nearside Headlamp switch insecure |1.2.4| | 3 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 3 |
| Offside Front Direction indicator insecure |1.5.3b| | 3 |
| Upper Steering headbearing has excessive free play |2.2.2| | 3 |
| Headlamp switch faulty |1.2.4| | 3 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 3 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Nearside Front Footrest missing |6.2.1a| | 3 |
| Rear Direction indicators not working |1.5.1c| | 3 |
| Steering control handlebar movement restricted by trapped cables |2.1.2c| | 3 |
| Indicator switch defective |1.5.4| | 3 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Offside Direction indicator incorrect colour |1.5.1b| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Front Direction indicators not working |1.5.1c| | 3 |
| Nearside Rear Footrest insecure |6.2.1a| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Fuel cap sealing washer torn |7.2.2c| | 2 |
| Horn control defective |1.7.2a| | 2 |
| Chain guard insecure |6.2.1c| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Offside Steering lock stop ineffective |2.1.3| | 2 |
| Offside Direction indicator not working |1.5.1c| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
| Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Rear Direction indicator not working |1.5.1c| | 2 |
| Registration plate lamp issues | 2 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 2 |
| Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Brake caliper|s| insecure |3.2.A1j| | 2 |
| Nearside Footrest missing |6.2.1a| | 2 |
| Lower Steering headbearing has excessive free play |2.2.2| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| An item not tested |Manual| | 2 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 2 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 2 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
| Front Front mudguard insecure |2.3.7| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Front Valve stem seriously damaged |5.2.3 |j|| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Nearside Handlebar deformed |2.1.1b| | 2 |
| Nearside Drive chain excessively tight |6.2.1d| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Position lamp switch insecure |4.2.2 |b|| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Nearside Position lamp switch insecure |1.1.4b| | 1 |
| Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Centre Rear Lower Wheel spoke cracked. |4.2.1b| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Front Upper Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Front position lamp damaged and function impaired |1.1.1b| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Centre Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Exhaust system insecure bolt missing from head & lower mount broken....exhaust very deteriorated |6.1.2 |a|| | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Front Position lamp switch insecure |1.1.4b| | 1 |
| Offside Front Brake locking device insecure |3.2.A1e| | 1 |
| Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Indicator switch insecure |1.5.4| | 1 |
| Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp insecure Bulb incorrectly fitted (4.1.1 (c)) | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Brake lever is inoperative |3.1.3c| | 1 |
| Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Upper Rear mono-shock insecure |2.4.B.4| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Brake component is fractured |3.1.5| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| All direction indicators adversely affected by the operation of another lamp all indicators flashing together (4.4.3 (b)) | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Front Upper Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Upper Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Upper Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Rear Upper Direction indicator incorrect colour |1.5.1b| | 1 |
| Centre Rear Upper Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Centre Front Upper Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Centre Front Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
| Centre Rear Lower Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear Brake component leaking fluid |3.2.B4| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Brake component is fractured |3.1.5| | 1 |
| Rear Brake caliper|s| securing bolt|s| missing pad reaction pin missing |3.2.A1j| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fork yoke cracked |2.1.1b| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Stop lamp adversely affected by the operation of another lamp indicators |4.3.3 |b|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Steering linkage locking device missing handle bar (2.1.3 (d)) | 1 |
| Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Front Wheel bearing play so excessive that directional control is impaired |5.1.3 |a| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Offside Front Handlebar mounting so insecure that steering is adversely affected not aligned properly compared to n/s,traps hand to tank |2.2.1 |a| |ii|| | 1 |
| Central Rear Upper Suspension arm pin or bush excessively worn shock bush/bearing |5.3.4 |a| |i|| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Footrest missing Both rear |6.2.1a| | 1 |
| Rear suspension bearing has excessive free play Swinging arm pivot |2.4.A2a|i|| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Handlebar cracked |2.1.1b| | 1 |
| Rear Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Brake lever mounting insecure |3.1.2a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket shock absorber bolt loose |6.2.1h| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Upper Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Offside Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
| Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Brake pedal mounting cracked . |3.1.2c| | 1 |
| Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Chain guard fouling another component |6.2.1c| | 1 |
| Stop lamp not working via rear brake (4.3.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Rear Wheel bearing has excessive play sprocket carrier bearing (5.1.3 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Exhaust system insecure not attached at cylinder head (6.1.2 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle housing insecure on handlebar (6.2.7 (a) (ii)) | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
| All direction indicators not working not flashing |4.4.1 |a| |ii|| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Nearside Front Headlamp switch insecure |1.2.4| | 1 |
| Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Direction indicators not working |1.5.1c| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Central Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear wheel spindle loose |2.4.A.2b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Upper Front suspension assembly component cracked |2.3.1| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Rear Brake cylinder operating mechanism has excessive travel |1.1.16 |e| |i|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Offside Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Motorcycle structure cracked |6.1.1a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake hose which buldges |3.2.B4| | 1 |
| Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
| Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Centre Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Offside Front Upper Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Wheel spoke excessively bent |4.2.1b| | 1 |
| Inner Rear Lower Rear suspension component loose |2.4.A.1a| | 1 |
| Outer Front Upper Direction indicators not working |1.5.1c| | 1 |
| Inner Rear Lower Direction indicators not working |1.5.1c| | 1 |
| Offside Front Upper Brake lever insecure |3.1.2a| | 1 |
| Inner Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Direction indicator insecure |1.5.3b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Throttle operating incorrectly housing insecure |6.2.1f| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Front position lamp missing |1.1.1a| | 1 |