Most common failures | No# failures |
---|
Brakes imbalanced across an axle | 13 |
Rear brake binding | 5 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Braking system leaking |3.6.A.1| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Horn not working |1.6.2a| | 2 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake application uneven | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 2 |
Nearside front brake binding |3.7.B.1| | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Steering wheel retaining device insecure |2.1.6| | 1 |
Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced main beam |1.7.5a| | 1 |
Steering wheel retaining device insecure relative movement between wheel & column |2.1.6| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
Offside Front Upper Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Upper Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Lower Suspension arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Offside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Headlamp aim out of alignment | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Offside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Service brake is causing the steering wheel to severely pull one way |3.7.C.2| | 1 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Front Direction indicators not working |1.4.A.2c| | 1 |
Rear Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
front brake binding |3.7.B.1| | 1 |
Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front suspension has excessive play in a track control arm inner bush |2.5.B.2b| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Front brake application uneven | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Nearside Outer Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Nearside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear brake drum contaminated by oil |3.5.1h| | 1 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Nearside Front Service brake grabbing severely (1.2.1 (c)) | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
Offside Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Service brake indicates brake bind |3.7.D.2a| | 1 |
Offside Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Nearside Headlamps matched pair are not the same colour |1.7.6| | 1 |