>

MOT History from tests of petrol SHINERAY XYs year 2008

Review the list of common SHINERAY XY failures below or to perform a specific mot history check on your SHINERAY then use our popular KnowYourCar service

mot history
Pass percent:53.06%
(The average a petrol SHINERAY XY year 2008 passes without issue)
Based on:196 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment29
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|12
Brake hose excessively deteriorated11
Horn not working |1.7.3a|9
Registration plate issues9
Rear reflector on motorcycle missing |1.4.1|8
Rear suspension bush has excessive free play |2.4.A2a|i||7
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|7
Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||6
Headlamp insecure |1.2.3b|5
Drive chain worn to excess |6.2.1e|5
Front Wheel has an excessively distorted bead rim. |4.2.2|5
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|4
Offside Rear Direction indicators not working |1.5.1c|4
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|3
Handlebar deformed |2.1.1b|3
Offside Rear Direction indicator not working |1.5.1c|3
Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Lower Rear suspension bush has excessive free play |2.4.A2a|i||3
Steering headbearing has excessive free play |2.2.2|3
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|3
Drive chain excessively tight |6.2.1d|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Handlebar mounting clamp bolt loose |2.1.1a|3
Drive chain excessively loose |6.2.1d|3
Riders seat insecure |6.2.1a|3
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Rear Brake hose stretched by suspension movement |3.2.B3b|2
Direction indicator not working |1.5.1c|2
Rear Wheel spoke excessively loose |4.2.1b|2
An item not tested |Manual|2
Rear mono-shock pivot excessively worn |2.4.B.4|2
Front Direction indicator incorrect colour |1.5.1b|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Rear suspension movement is excessively stiff |2.4.A.3b|2
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Front wheel bearings are excessively rough |2.3.5b|2
Nearside Front Direction indicator incorrect colour |1.5.1b|2
Offside Front Direction indicator incorrect colour |1.5.1b|2
Throttle operating incorrectly |6.2.1f|2
Rear Roller brake test indicates a sticking brake |3.3.A1a|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Nearside Front shock absorber seal failed and leaking oil |2.3.3|2
Offside Footrest insecure |6.2.1a|2
Nearside Rear Direction indicator insecure |1.5.3b|2
Front wheel bearings have excessive free play |2.3.5b|2
Front Wheel spoke excessively loose |4.2.1b|2
Horn not loud enough to be heard by another road user |1.7.3a|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Rear suspension bearing has excessive free play |2.4.A2a|i||2
Nearside Rear Direction indicator not working |1.5.1c|2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Rear Rear suspension bush has excessive free play |2.4.A2a|i||2
Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Fuel cap sealing washer missing |7.2.2c|1
Front wheel spindle loose |2.3.3a|1
Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Footrest missing |6.2.1a|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Position lamp switch insecure |1.1.4b|1
Nearside Rear Direction indicator incorrect colour |1.5.1b|1
Offside Rear Direction indicator damaged and function impaired |1.5.3a|1
Rear Brake pedal pivots excessively worn |3.1.3a|1
Rear Brake caliper|s| insecure |3.2.A1j|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Rear shock absorber insecurely mounted |2.4.A.3b|1
Offside Rear Direction indicator incorrect colour |1.5.1b|1
Lower Rear mono-shock pivot excessively worn |2.4.B.4|1
Front wheel spindle securing nut|s| loose |2.3.3a|1
Front Direction indicator not working |1.5.1c|1
Rear Direction indicator not working |1.5.1c|1
Rear Drive chain excessively tight |6.2.1d|1
Rear Brake back plate|s| insecure |3.2.A1j|1
Rear Brake pedal insecure |1.1.2 |e| |i||1
Brake pedal is inoperative |3.1.3c|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Offside Rear Direction indicator insecure |1.5.3b|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Front Wheel spoke missing |4.2.1b|1
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Nearside Steering lock stop ineffective |2.1.3|1
Offside Steering lock stop ineffective |2.1.3|1
Rear Brake pipe union leaking fluid |3.2.B4|1
Brake cylinder severely damaged |3.2.B1b|1
Rear Hydraulic brake control creeps under load. |3.1.4a|1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Front Brake lever insecure |3.1.2a|1
Rear Stop lamp insecure |1.3.3b|1
Front Brake hose stretched by suspension movement |3.2.B3b|1
Rear Brake pedal attachment screws loose |3.1.2b|1
Rear Brake pedal insecure |3.1.2a|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Front position lamp incorrect colour |1.1.2a|1
Rear Rear wheel bearings have excessive free play |2.4.A.2c|1
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|1
Nearside Front Direction indicator insecure |1.5.3b|1
Offside Front Direction indicator insecure |1.5.3b|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Footrest insecure |6.2.1a|1
Front Upper Brake pipe excessively damaged |3.2.B2a|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Nearside Direction indicator affected by the operation of another lamp |1.5.1c|1
Offside Direction indicator deteriorated and function impaired |1.5.3a|1
Headlamp switch faulty |1.2.4|1
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i||1
Rear Brake master cylinder has an excessively worn master cylinder pivot. |3.2.B5|1
Steering lock stop ineffective |2.1.3|1
Rear Brake disc|s| cracked |3.2.A1g|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Motorcycle structure excessively damaged |6.1.1a|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Inner Horn missing |1.7.1|1
Rear Wheel has an excessively distorted bead rim. |4.2.2|1
Rear Wheel spoke missing |4.2.1b|1
Throttle operating incorrectly |6.2.7 |a| |i||1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b|1
Rear suspension bush has excessive free play swinging arm bushes |2.4.A2a|i||1
Rear Drive chain sprocket worn to excess sprocket mountings |6.2.1e|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Front Steering lock stop missing |2.1.3|1
Brake lever insecure |3.1.2a|1
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Front Stop lamp remains on when the brake is released |1.3.1e|1
Front Brake disc|s| excessively scored |3.2.A1l|1
Front mudguard insecure |2.3.7|1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j|1
Nearside Headlamp switch insecure |1.2.4|1
Front position lamp missing |1.1.1a|1
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Brake hose damaged1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Brake pedal insecure |3.1.2a|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Rear Brake component has an inadequate repair |3.1.5|1
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Front Horn not working |1.7.3a|1
Upper Steering headbearing has excessive free play |2.2.2|1
Lower Steering headbearing has excessive free play |2.2.2|1
Offside Rear Brake caliper|s| insecure |3.2.A1j|1
Rear Footrest missing |6.2.1a|1
Direction indicator not working all 4, faulty bulbs & blown relay |1.5.1c|1
Rear reflector on motorcycle missing now fitted |1.4.1|1
Centre Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Centre Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Centre Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Centre Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Fuel hose leaking |7.2.1a|1
Nearside Rear Direction indicators not working also insecure |1.5.1c|1
Headlamp aim headlamp damaged and function impaired Bulb insecure |1.2.3a|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front suspension has inadequate damping effect. |front forks twist under braking| |2.3.6c|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride top steering nut not tight to washer |6.2.1h|1
Front All position lamps do not illuminate immediately when switched on |1.1.3a|1
Rear All position lamps do not illuminate immediately when switched on |1.1.3a|1
Clutch lever positioned so it cannot be readily operated. |6.2.1g|1
Offside Direction indicator insecure |1.5.3b|1
Nearside Rear Direction indicators not working |1.5.1c|1
Nearside Front Brake disc|s| securing bolt|s| loose |3.2.A1g|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy