Most common failures | No# failures |
---|
Headlamp aim out of alignment | 39 |
Rear reflector missing (4.8.2 (a) (ii)) | 11 |
Rear Position lamp not working (4.2.1 (a)) | 11 |
Registration plate issues | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 6 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 5 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 5 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 3 |
Rear Brake lagging in operation (1.2.1 (d)) | 3 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Horn not working (7.7 (a)) | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Central Rear Lower Stop lamp not working Rear brake light not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Central Rear Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Central Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Brake pedal has insufficient reserve travel Brake foot pedal insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Registration plate lamp issues | 1 |
Headlamp aim projected beam image obviously incorrect continental dip beam pattern (4.1.2 (c)) | 1 |
Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Rear Brake lever pivot has excessive free play (1.1.1 (b)) | 1 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Rear Lower Position lamp not working Rear position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
Front Suspension component mounting has an unsafe modification forks dropped through yokes. suspension travel affected (5.3.3 (c) (i)) | 1 |
Headlamp aim projected beam image obviously incorrect front lamps fitted, operated by dip switch have incorrect beam image (4.1.2 (c)) | 1 |
Front Brake caliper leaking leaking from nipple (1.1.16 (b) (i)) | 1 |
Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected front wheel nut only on by two threads (5.2.1 (c) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect LHD headlamp image (4.1.2 (c)) | 1 |