| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 42 |
| Registration plate issues | 25 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Horn not working |1.7.3a| | 8 |
| Horn not working (7.7 (a)) | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 6 |
| Rear reflector missing (4.8.2 (a) (ii)) | 6 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Rear Position lamp not working (4.2.1 (a)) | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Offside Front Direction indicator not working |1.5.1c| | 4 |
| Stop lamp remains on when the brake is released |1.3.1e| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Stop lamp missing |1.3.3a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear wheel spindle loose |2.4.A.2b| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.5.1) | 2 |
| Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Nearside Front Footrest insecure (6.2.12 (a)) | 2 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 2 |
| Registration plate lamp issues | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Front Footrest insecure |6.2.1a| | 1 |
| Stop lamp does not emit a steady light front brake light contol |1.3.1b| | 1 |
| Stop lamp missing |1.3.3a| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake component inadequately mounted Brake lever clamp fractured |1.1.21 |c|| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment Locked on, on brake test. |3.2.A1i| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Brake pedal insecure |3.1.2a| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Sidecar wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Stop lamp does not illuminate immediately a brake applies brake light not working from front and rear control |1.3.1a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp stop / side bulb in wrong |1.1.3b| | 1 |
| Stop lamp affected by the operation of another lamp stop / side bulb in wrong |1.3.2| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Stop lamp not working on rear foot brake pedal |4.3.1 |a| |ii|| | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Rear Brake lagging in operation |1.2.1 |d|| | 1 |
| Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Offside Front Indicator switch insecure |1.5.4| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Sidecar rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Sidecar direction indicator not working |1.5.1c| | 1 |
| Rear Sidecar direction indicator not working |1.5.1c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front & Rear |1.3.1a| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
| Front All position lamps not working |4.2.1 |a|| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| All direction indicators obviously incorrectly positioned front winkers need to be a minimum of 240mm seperation and rear should be a minimum of 180mm |4.4.3 |a|| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Wheel alignment incorrect which adversely affects the handling h/ bars |2.5.1| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear wheel nut has no split pin |6.2.1h| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Position lamp not working Tail lamp not working. (4.2.1 (a)) | 1 |
| Fuel system component leaking TAP (6.1.3 (b) (i)) | 1 |
| Rear Stop lamp not working no brake light on front or rear (4.3.1 (a) (ii)) | 1 |
| Footrest insecure riders left foot peg insecure nut loose (6.2.12 (a)) | 1 |
| Front Handlebar retaining device loose left switch gear moving on bar causing clutch to be obstructed (2.2.1 (b) (i)) | 1 |
| Stop lamp not working when front brake applied (4.3.1 (a) (ii)) | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Horn missing (1.7.1) | 1 |
| Front Horn not working (1.7.3a) | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Rear Direction indicators not working (1.5.1c) | 1 |
| Nearside Front Direction indicators flashing less than 60 times a minute (1.5.1c) | 1 |
| Drive chain excessively loose (6.2.1d) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front All position lamps not working (4.2.1 (a)) | 1 |
| Front Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment N/side lever bolted together should be welded ! (1.1.15 (f)) | 1 |
| Stop lamp not working foot brake (4.3.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Front Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Front Wheel spoke missing four (5.2.2 (d)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Offside Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Front Brake cylinder has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Nearside Front Upper Position lamp not working (4.2.1 (a)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Brake component inadequately mounted BRAKE LEVER MOUNT FRACTURED. (1.1.21 (c)) | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Wheel has bolts/rivets missing or loose to the extent that control of the motorcycle is likely to be adversely affected (5.2.2 (e) (ii)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Brake component inadequately mounted DRUM AND SHOES NOT FITTED CORRECTLY TO FRONT BRAKE (1.1.21 (c)) | 1 |
| Offside Rear Upper Shock absorber insecurely attached SHOCK ABSORBER BOLT LOOSE (5.3.2 (a) (i)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
| Fuel pipe leaking (6.1.3 (b) (i)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls bulb (4.3.2 (a) (iii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Fuel pipe leaking Leaking on filter connection (6.1.3 (b) (i)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |