Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 14 |
Registration plate lamp issues | 13 |
Headlamp aim out of alignment | 12 |
Brakes imbalanced across an axle | 11 |
Windscreen wiper does not clear the windscreen effectively | 9 |
Parking brake: efficiency below requirements |3.7.C.1b| | 6 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 6 |
Service brake: efficiency below requirements |3.7.B.7| | 6 |
Offside rear brake recording little or no effort |3.7.B.5a| | 5 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Rear brake binding | 5 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 4 |
Offside Headlamp not working on dipped beam |1.7.5a| | 4 |
Front brake application uneven | 4 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
Rear parking brake recording little or no effort | 3 |
Horn not working |1.6.2a| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Side repeater not working |1.4.A.2c| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 3 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Brake hose excessively deteriorated | 3 |
Offside Rear brake caliper leaking |3.6.A.1| | 2 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
Brake pipe excessively corroded | 2 |
Offside Parking brake inoperative on one side |1.4.1 |a|| | 2 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Offside Front Headlamp not working on main beam |1.7.5a| | 2 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Direction indicators not working |1.4.A.2c| | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
All position lamps not working |1.1.A.3b| | 2 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Windscreen wiper blade insecure | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Registration plate issues | 2 |
Rear Mechanical brake component has restricted free movement | 2 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 2 |
Brake hose has insufficient room to move | 1 |
Offside Drag link end ball joint dust cover missing |2.2.C.1c| | 1 |
Direction indicators not in good working order |function impaired| |1.5.A1b| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Nearside Steering pivot point has excessive play |2.2.B.1g| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Nearside Front Upper Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Offside Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Parking |secondary brake| on a single line braking system imbalanced across an axle Axle 1 |1.3.1 |b| |i|| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Upper Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Power steering pump leaking from a failed component |2.3.3b| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front brake caliper securing device missing |3.5.1j| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear Gas suspension unit deteriorated and likely to fail |2.4.D.1b| | 1 |
Nearside Rear Gas suspension unit deteriorated and likely to fail |2.4.D.1b| | 1 |
Nearside Rear Sub-frame locating pin locking device missing |2.4.G.3b| | 1 |
Offside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Offside Rear Braking system leaking |3.6.A.1| | 1 |
Nearside Rear reflector missing |1.5.1a| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Drag link end ball pin shank loose |2.2.B.1c| | 1 |
Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Rear Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Offside Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Rear Rear passenger seat cannot be secured in the upright position. |6.2.3| | 1 |
Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Nearside Front Steering locking device missing Track rod end (2.1.3 (d)) | 1 |
Offside Front Steering locking device missing Track rod end (2.1.3 (d)) | 1 |
Nearside Rear Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
Nearside Front Lower Shock absorbers insecurely attached no lock nut as bolt too short (5.3.2 (a) (i)) | 1 |
Offside Front Lower Shock absorbers insecurely attached (5.3.2 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Rear Service brake effort inadequate at a wheel Both (1.2.1 (a) (i)) | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Front Fuel system component leaking |7.2.3| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Steering component mounting prescribed area is fractured rack mtg. plate too thin.... fractured |2.2.C.1h| | 1 |
Nearside Steering rack insecure |2.2.B.1a| | 1 |
Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
passenger door does not latch securely closed |6.2.B.1a| | 1 |
Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
Nearside Front Coil spring mounting loose adjustment lock nut slack |2.4.C.3a| | 1 |
Steering column universal joint insecure pinch bolt onto rack |2.1.5| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Front drive shaft coupling flexible rubber or fabric coupling unit breaking up |2.5.C.1d| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Nearside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Inner Headlamp not working on main beam |1.7.5a| | 1 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Seat belt insecurely fixed to the vehicles structure |5.2.1a| | 1 |
Mechanical brake component has restricted free movement | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Rear brake application uneven | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Rear Anti-roll bar missing |2.4.G.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
Headlamp switch insecure dipswitch |1.7.1| | 1 |
Stop lamp not working both |1.2.1b| | 1 |
Statutory seat belt missing both front |5.1.1| | 1 |
Rear Brake valve leaking n/s & o/s (1.1.7 (d) (i)) | 1 |
Headlamp aim not tested |1.8.A.1c| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Hazard warning switch missing |1.4.B.1d| | 1 |
Windscreen washer control missing |8.2.1a| | 1 |
Rear Brake pivot has restricted free movement |3.5.1k| | 1 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Driver`s seat insecure |6.2.A.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Nearside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Indicator switch faulty |1.4.A.1| | 1 |
Offside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Inner Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Offside Inner Front Subframe mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Inner Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Inner Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt compression strut (5.3.4 (b) (ii)) | 1 |
Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |