| Most common failures | No# failures |
|---|
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 8 |
| Headlamp aim out of alignment | 4 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
| Windscreen has damage | 2 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Drag link end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Front Tie bar/rod rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Tie bar/rod rubber mounting bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Obligatory mirror insecure |8.1.1| | 1 |
| Front Power steering pipe|s| or hose|s| leaking from a joint |2.3.3b| | 1 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
| Rear Lower Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Rear Seat belt attachment fitting badly deteriorated |5.2.3| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Front Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Obligatory mirror missing |8.1.1| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Statutory seat belt missing |5.1.1| | 1 |
| Offside Rear Statutory seat belt missing |5.1.1| | 1 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Rear brake application uneven | 1 |
| rear brakes release unevenly |3.7.B.4| | 1 |
| Nearside Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Panhard rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Panhard rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Suspension arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Registration plate lamp issues | 1 |
| Nearside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Offside Front Braking system leaking |3.6.A.1| | 1 |
| Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |