MOT History from tests of petrol ROVER P6s year 1980

Review the list of common ROVER P6 failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history

Pass percent:0.00%

(The average a petrol ROVER P6 year 1980 passes without issue)

Based on:3 MOT Tests

Most common failures	No# failures
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Windscreen wiper does not clear the windscreen effectively	2
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Rear fog lamp not working \|1.3.2b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid \|3.6.A.1\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Rear parking brake recording little or no effort	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Brakes imbalanced across an axle	1
Horn not working \|1.6.2a\|	1
Registration plate lamp issues	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear brake disc excessively pitted \|3.5.1h\|	1
Offside Rear brake disc excessively pitted \|3.5.1h\|	1
Brake pipe excessively corroded	1
Brake performance not tested \|3.7.A.1\|	1
Emissions not tested \|7.0\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.C.1a\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Front front brake binding \|3.7.B.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Offside Stop lamp not working \|1.2.1b\|	2
Windscreen wiper does not clear the windscreen effectively	2
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Rear fog lamp not working \|1.3.2b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Rear Hydraulic brake cylinder leaking hydraulic fluid \|3.6.A.1\|	1
Nearside rear brake recording little or no effort \|3.7.B.5a\|	1
Rear parking brake recording little or no effort	1
Service brake: efficiency below requirements \|3.7.B.7\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Brakes imbalanced across an axle	1
Horn not working \|1.6.2a\|	1
Registration plate lamp issues	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Rear brake disc excessively pitted \|3.5.1h\|	1
Offside Rear brake disc excessively pitted \|3.5.1h\|	1
Brake pipe excessively corroded	1
Brake performance not tested \|3.7.A.1\|	1
Emissions not tested \|7.0\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Service brake: efficiency below requirements \|3.7.C.1a\|	1
Parking brake: efficiency below requirements \|3.7.C.1b\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Front front brake binding \|3.7.B.1\|	1

MOT History from tests of petrol ROVER P6s year 1980

Find us on Facebook