| Most common failures | No# failures |
|---|
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 6 |
| Brakes imbalanced across an axle | 5 |
| Registration plate lamp issues | 4 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 4 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 4 |
| Windscreen wiper does not clear the windscreen effectively | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 3 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 3 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 2 |
| Horn not working |1.6.2a| | 2 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 2 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Offside Steering rack gaiter split |2.2.D.2d| | 2 |
| Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b)) | 2 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 2 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 2 |
| Headlamp aim out of alignment | 2 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Upper engine mounting bracket missing |6.1.D.1b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| All position lamps adversely affected by the operation of another lamp hazards/ poor earth (4.2.3 (c)) | 1 |
| Rear Passengers seat backrest cannot be secured in the upright position. (6.2.6 (a) (i)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Electrical wiring insecure and in contact with sharp edges battery live through boot floor (4.11 (a) (ii)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Headlamp switch faulty |1.7.1| | 1 |
| Nearside Rear Rear position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Rear position lamp|s| has a product on the light source so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Track rod end ball joint has excessive play Both |2.2.B.1f| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Rear Rear fog lamp missing |4.5.1 |a| |ii|| | 1 |
| Offside Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Offside Rear Stop lamp|s| light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Nearside Front Upper Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Windscreen wiper control is inaccessible to the driver |8.2.1a| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Direction indicator incorrect colour |1.4.A.2f| | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Upper Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Rear brake binding | 1 |
| Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i)) | 1 |
| Offside Front Shock absorbers has negligible damping effect (5.3.2 (d)) | 1 |
| Nearside Front Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Front Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 1 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Radius arm worn and seriously weakened |2.4.G.1| | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
| Windscreen washer not working | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering Floor |6.1.A.1| | 1 |
| Nearside Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Front Inner Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Inner Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Radius arm worn and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Front Emissions not tested not tested due to front pipe flexi blowing badly (8.2.1.2 (d)) | 1 |
| Front Upper Engine mounting damaged or deteriorated resulting in excessive movement mount / stabizer bar rubbers worn movment (6.1.8 (a) (i)) | 1 |
| Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sills corroded and holed n/s front and rear o/s rear (6.2.2 (d) (i)) | 1 |
| Nearside Front Floor excessively deteriorated holed and corroded (6.2.4 (a) (i)) | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |