Most common failures | No# failures |
---|
Service brake efficiency below requirements (1.2.2 (a) (i)) | 3 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 3 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 3 |
Registration plate lamp issues | 2 |
Brakes imbalanced across an axle | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 2 |
Nearside Front Lower Shock absorbers has an excessively worn bush (5.3.2 (c)) | 1 |
Nearside Front Suspension rod ball joint dust cover no longer prevents the ingress of dirt cone knuckle boot split (5.3.4 (b) (ii)) | 1 |
Rear brake binding | 1 |
Rear parking brake recording little or no effort | 1 |
Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
Windscreen wiper does not clear the windscreen effectively | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b)) | 1 |
Front Sub-frame attachment bracket/mounting insecure and impairing directional stability mounting bolts loose (5.3.3 (a) (ii)) | 1 |
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii)) | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
Fluid leak harmful to the environment or a risk to other road users coolant leak (8.4.1 (a) (i)) | 1 |
Front Service brake excessively binding both front (1.2.1 (f)) | 1 |
Nearside Front Seat belt flexible stalk damaged (7.1.2 (b) (i)) | 1 |
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Hazard warning lamps inoperative (4.4.1 (e)) | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front panel (5.3.6 (a) (i)) | 1 |
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front panel (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance closing panel (5.3.6 (a) (i)) | 1 |
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced centre floor (7.1.1 (a) (i)) | 1 |
Direction indicator not working (1.4.A.2c) | 1 |
Stop lamp not working (1.2.1b) | 1 |
Hazard warning lamps inoperative (1.4.B.1b) | 1 |
Indicator switch insecure (1.4.A.1) | 1 |
Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
rear brake recording little or no effort (3.7.B.5a) | 1 |
Service brake: efficiency below requirements (3.7.B.7) | 1 |
Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Rear Suspension component likely to fail trailing arm (5.3.3 (b) (ii)) | 1 |
Registration plate issues | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Front Hydraulic brake calliper leaking Both (1.1.16 (b) (i)) | 1 |
Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Knuckle Joint (5.3.4 (b) (ii)) | 1 |
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt Knuckle Joint (5.3.4 (b) (ii)) | 1 |
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
Horn not working (7.7 (a)) | 1 |
Offside Rear Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Reversing lamp inoperative (4.6.1 (a)) | 1 |
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |