MOT History from tests of diesel ROVER MINIs year 1991

Review the list of common ROVER MINI failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history

Pass percent:33.33%

(The average a diesel ROVER MINI year 1991 passes without issue)

Based on:6 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	3
Windscreen wiper does not clear the windscreen effectively	2
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Nearside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Offside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	1
Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Exhaust system not adequately supported \|7.1.1\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	3
Windscreen wiper does not clear the windscreen effectively	2
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Nearside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Outer Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Offside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Front Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	1
Offside Vehicle structure is damaged, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Front Exhaust system not adequately supported \|7.1.1\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Front Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

MOT History from tests of diesel ROVER MINIs year 1991

Find us on Facebook