Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 22 |
Rear parking brake recording little or no effort | 21 |
Headlamp aim out of alignment | 18 |
Brakes imbalanced across an axle | 16 |
Registration plate lamp issues | 16 |
Windscreen wiper does not clear the windscreen effectively | 9 |
Rear brake binding | 7 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 5 |
Offside Headlamp not working on main beam |1.7.5a| | 5 |
Horn not working |1.6.2a| | 5 |
Offside Front Direction indicator not working |1.4.A.2c| | 5 |
Brake hose excessively deteriorated | 5 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 4 |
Offside rear brake recording little or no effort |3.7.B.5a| | 4 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
Offside Headlamp not working on dipped beam |1.7.5a| | 4 |
Brake pipe excessively corroded | 4 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Power steering component|s| leaking |2.3.3b| | 3 |
Rear brake application uneven | 3 |
Rear Mechanical brake component has restricted free movement | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Offside Front Headlamp not working on main beam |1.7.5a| | 3 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 2 |
Parking brake lever has no reserve travel |3.1.6b| | 2 |
Offside front brake binding |3.7.B.1| | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
Exhaust engine idle speed too high |7.3.A.2a| | 2 |
Battery insecure |1.9.1| | 2 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Stop lamp not working |1.2.1b| | 2 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
Mechanical brake component has restricted free movement | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Offside Rear Direction indicator flashing less than 60 times a minute |1.4.A.2g| | 2 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 2 |
Brake pedal has no servo assistance |3.3.B.2| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Rear Braking system leaking |3.6.A.1| | 2 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Offside Rear Lower Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Shock absorber detached |2.7.2b| | 1 |
Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength nearside rear bump stop (5.3.6 (a) (i)) | 1 |
Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded Around spring cup mounting |2.4.A.3| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Brake hose leaking |3.6.A.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor |6.1.B.2| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
Nearside Horn not working |1.6.2a| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Brake has no servo assistance |3.3.B.2| | 1 |
Front Steering box damaged and unserviceable |2.2.C.1d| | 1 |
Offside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Power steering component|s| leaking from a failed seal |2.3.3b| | 1 |
Windscreen wiper not working (3.4 (a)) | 1 |
Offside Front Inner Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Outer Trailing arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Steering box insecure |2.2.B.1a| | 1 |
Offside Front Ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Rear brake disc excessively pitted |3.5.1h| | 1 |
Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Nearside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Power steering pump leaking from a failed component |2.3.3b| | 1 |
Nearside Rear Shock absorber detached |2.7.2b| | 1 |
Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt both bottom covers |5.3.4 |b| |ii|| | 1 |
Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Front Windscreen wiper blade missing |8.2.2| | 1 |
Parking brake: efficiency below requirements |3.7.D.4| | 1 |
Offside Inner Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Rear brake caliper leaking |3.6.A.1| | 1 |
Nearside Rear brake disc contaminated by brake fluid |3.5.1h| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front Lower Radius arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Front front brake binding |3.7.B.1| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Registration plate issues | 1 |
Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Nearside Inner Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
Power steering pipe|s| or hose|s| leaking from a seal |2.3.3b| | 1 |
Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Tie bar/rod locating pin locking device missing |2.4.G.3b| | 1 |
Nearside Front Lower Trailing arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Fuel pipe insecure |7.2.1| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front passenger seat insecure |6.2.3| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Offside Front Upper Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Upper Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Brake pedal actuating lever has abnormal movement indicating maladjustment or excessive wear |3.3.A.1h| | 1 |
Nearside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front front brake recording little or no effort |3.7.B.5a| | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Rear Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Central Fuel pipe insecure |7.2.1| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded in area of spring eye bolt |2.4.A.3| | 1 |
Nearside Upper Front suspension locking device missing |2.5.A.4| | 1 |
Front Mechanical brake component securing device missing |3.5.1i| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Torsion bar attachment bracket corroded and seriously weakened |2.4.E.4c| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Steering component is not secure to the vehicle structure |2.2.B.1a| | 1 |
Nearside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Nearside Front Steering locking device missing |2.2.C.1g| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Brake pipe inadequately supported |3.6.B.1| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Steering box has relative movement between sector shaft and the drop arm |2.2.B.1b| | 1 |
Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front brake application uneven | 1 |
Headlamp switch faulty |1.7.1| | 1 |
Nearside Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Nearside Service brake excessively binding (1.2.1 (f)) | 1 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Nearside Front Position lamp not working and rear (4.2.1 (a) (ii)) | 1 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt lower (5.3.4 (b) (ii)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i)) | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Lower Driver`s door hinge insecure |6.2.B.2| | 1 |
Nearside brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Centre Front Fuel hose leaking |7.2.3| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Central Exhaust has a major leak of exhaust gases joint |7.1.2| | 1 |
Rear Exhaust has a major leak of exhaust gases joint |7.1.2| | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Rear Fuel pipe leaking |7.2.3| | 1 |
Offside Brake pipe inadequately clipped front to rear pipe |3.6.B.1| | 1 |
Exhaust has a major leak of exhaust gases rear silencer&front y joint |7.1.2| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired sill holed¬ fully welded |5.2.6| | 1 |
Power steering pipe|s| or hose|s| leaking from a joint at pump |2.3.3b| | 1 |
Exhaust has a major leak of exhaust gases silencer box |7.1.2| | 1 |
Offside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Brake pipe inadequately supported front to rear pipes |3.6.B.1| | 1 |
Exhaust has a major leak of exhaust gases at front pipes&silencer box |7.1.2| | 1 |
Fuel pipe insecure front to rear pipe |7.2.1| | 1 |
Nearside Rear Leaf spring has excessive wear in an anchor pin and/or bush rearmost |2.4.B.2| | 1 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |