| Most common failures | No# failures |
|---|
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 43 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 37 |
| Windscreen wiper does not clear the windscreen effectively | 27 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 22 |
| Headlamp aim out of alignment | 21 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
| Brake pipe excessively corroded | 14 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 12 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 10 |
| Registration plate issues | 8 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Registration plate lamp issues | 7 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 7 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Rear parking brake recording little or no effort | 5 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 5 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 4 |
| Emissions not tested |7.0| | 4 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Offside Headlamp not working on main beam |1.7.5a| | 4 |
| Brakes imbalanced across an axle | 4 |
| Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 3 |
| Nearside Rear Stop lamp not working |1.2.1b| | 3 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 3 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
| Rear brake application uneven | 3 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Horn not working |1.6.2a| | 3 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Nearside front brake binding |3.7.B.1| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Battery insecure |1.9.1| | 2 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Nearside Rear Seat belt retracting mechanism defective |5.2.5b| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear brake binding | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Windscreen has damage | 2 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Battery insecure and likely to fall from carrier bolt was loose for locking clamp (4.13 (a) (ii)) | 1 |
| Nearside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Front Anti-roll bar linkage worn and seriously weakened |2.4.G.1| | 1 |
| Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
| Offside Inner Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Braking system leaking union block on o/s/f inner wing |3.6.A.1| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wing panel |5.2.6| | 1 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Shock absorber insecure insecure locking device |2.7.2b| | 1 |
| Body has a sharp edge caused by corrosion fuel flap |6.1.C.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded wheel arch |5.2.6| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded Inner wheel arch |2.4.A.3| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Front brake disc cracked |3.5.1h| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Rear All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Front Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Front Body or chassis is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Rear brake drum contaminated by brake fluid |3.5.1h| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear fog lamp not working |1.3.2b| | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Windscreen wiper blade missing |8.2.2| | 1 |
| Offside Front Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Indicator switch insecure |1.4.A.1| | 1 |
| Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Direction indicator insecure |1.4.A.2b| | 1 |
| Nearside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
| Centre Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Nearside Front Headlamp insecure |1.7.3| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Inner Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Centre Obligatory mirror missing |8.1.1| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Windscreen wiper blade insecure | 1 |
| Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Outer Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Driver`s door does not latch securely closed |6.2.B.1a| | 1 |
| Offside Front Suspension arm insecure |2.4.G.1| | 1 |
| Offside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Inner Subframe mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded Sill |2.4.A.3| | 1 |
| Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill ending (5.3.6 (a) (i)) | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Nearside Rear Shock absorber casing damaged externally so the unit does not function |2.7.2a| | 1 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |