MOT History from tests of diesel ROVER 115s year 1992

Review the list of common ROVER 115 failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history

Pass percent:45.45%

(The average a diesel ROVER 115 year 1992 passes without issue)

Based on:11 MOT Tests

Most common failures	No# failures
Offside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	3
Nearside Windscreen wiper blade deteriorated \|8.2.2\|	2
Nearside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Front Suspension arm corroded and seriously weakened \|2.4.G.1\|	1
Registration plate lamp issues	1
Front Gas suspension has no suspension movement \|2.4.D.5\|	1
Brake pipe excessively corroded	1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Upper Front suspension has excessive play in a upper suspension ball joint \|2.5.B.1a\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Direction indicator insecure \|1.4.A.2b\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Exhaust tailpipe not capable of allowing the emission probe to be inserted \|7.4.B.1\|	1
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Stop lamp not working \|1.2.1b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Offside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	3
Nearside Windscreen wiper blade deteriorated \|8.2.2\|	2
Nearside Rear Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Front Suspension arm corroded and seriously weakened \|2.4.G.1\|	1
Registration plate lamp issues	1
Front Gas suspension has no suspension movement \|2.4.D.5\|	1
Brake pipe excessively corroded	1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Upper Front suspension has excessive play in a upper suspension ball joint \|2.5.B.1a\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Direction indicator insecure \|1.4.A.2b\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Exhaust tailpipe not capable of allowing the emission probe to be inserted \|7.4.B.1\|	1
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Outer Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Stop lamp not working \|1.2.1b\|	1

MOT History from tests of diesel ROVER 115s year 1992

Find us on Facebook