Most common failures | No# failures |
---|
Rear parking brake recording little or no effort | 8 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Parking brake: efficiency below requirements |3.7.C.1b| | 3 |
Front brake application uneven | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Windscreen wiper does not clear the windscreen effectively | 2 |
Registration plate lamp issues | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
front brake binding |3.7.B.1| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Nearside coil spring broken |2.4.C.1a| | 1 |
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
Headlamp aim out of alignment | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Steering system has excessive free play detected at the steering wheel |steering box fitted| |2.2.A.1a| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear brake binding | 1 |
Nearside Rear Brake pipe leaking |3.6.A.1| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Front coil spring fractured |2.4.C.1a| | 1 |
Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Front coil spring broken |2.4.C.1a| | 1 |
Horn emits two or more alternating tones |1.6.2d| | 1 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Fuel system component leaking |7.2.3| | 1 |
Nearside Rear Fluid suspension unit interconnecting pipe corroded and seriously weakened |2.4.D.3| | 1 |
Offside Rear Fluid suspension unit interconnecting pipe corroded and seriously weakened |2.4.D.3| | 1 |
Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
Nearside Parking brake recording little or no effort |3.7.D.3a| | 1 |
Offside Parking brake recording little or no effort |3.7.D.3a| | 1 |