Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Parking brake: efficiency below requirements |3.7.B.7| | 14 |
Brakes imbalanced across an axle | 13 |
Horn not working |1.6.2a| | 11 |
Registration plate lamp issues | 11 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 8 |
Service brake: efficiency below requirements |3.7.B.7| | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Rear parking brake recording little or no effort | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
Windscreen wiper blade insecure | 3 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 3 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
Rear brake binding | 2 |
Parking brake: efficiency below requirements |3.7.C.1b| | 2 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Nearside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 2 |
Exhaust system not adequately supported |7.1.1| | 2 |
Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 2 |
Offside Front front brake binding |3.7.B.1| | 2 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Rear brake application uneven | 2 |
rear brakes release unevenly |3.7.B.4| | 2 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Fuel system component leaking pump |7.2.3| | 1 |
Offside Front Upper Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Centre Exhaust system not adequately supported |7.1.1| | 1 |
Offside Steering locking device insecure |2.2.C.1g| | 1 |
Nearside Front Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Front Valve stem seriously damaged |4.1.D.1e| | 1 |
Nearside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Rear Valve stem seriously damaged |4.1.D.1e| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Rear Mechanical brake component securing device missing |3.5.1i| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Centre Front Fuel system component leaking |7.2.3| | 1 |
Nearside Rear Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Fuel cap/sealing device sealing washer torn |7.2.4c| | 1 |
Nearside Front Front drive shaft coupling flexible rubber or fabric coupling insecure |2.5.C.1e| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Battery insecure |1.9.1| | 1 |
Offside Front Steering locking device insecure |2.2.C.1g| | 1 |
Offside Front Direction indicators not working |1.4.A.2c| | 1 |
Nearside Front Front drive shaft coupling is insecure |2.5.C.1c| | 1 |
Offside Front Front drive shaft coupling is insecure |2.5.C.1c| | 1 |
Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Rear Fuel pipe leaking |7.2.3| | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Passenger`s seat insecure |6.2.A.1| | 1 |
Nearside Front Inner Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Offside Front Inner Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Front brake application uneven | 1 |
Mechanical brake component has restricted free movement | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake pipe inadequately clipped |3.6.B.1| | 1 |
Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Brake hose has insufficient room to move | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Windscreen wiper blade missing |8.2.2| | 1 |
Direction indicators not working |1.4.A.2c| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Indicator tell tale missing |1.4.A.2a| | 1 |
Windscreen washer control is inaccessible to the driver |8.2.1a| | 1 |
Nearside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
Rear Fuel hose leaking |7.2.3| | 1 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |