Most common failures | No# failures |
---|
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Stop lamp missing |1.3.3a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Brake performance not tested |3.3| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Horn not working |7.7 |a| |ii|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Front Valve stem seriously misaligned |5.2.3 |j|| | 1 |
Rear Valve stem seriously misaligned |5.2.3 |j|| | 1 |
Horn not working |1.7.3a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Central Front Steering headbearing has excessive wear or free play Excessive play adjusted during test |2.2.2 |f| |i|| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Headlamp aim not tested dip beam not working (4.1.2 (b)) | 1 |
Registration plate lamp issues | 1 |
Front Stop lamp not working front switch not working (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak fork stanchion pitted (5.3.2 (b)) | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Headlamp aim out of alignment | 1 |
Front Lower Exhaust has a major leak of exhaust gases DOWN PIPE. (6.1.2 (a)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Central Rear Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Rear Lower Suspension component ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Central Front Upper Horn not working (7.7 (a) (ii)) | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |