| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Registration plate issues | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| All direction indicators not working both front |4.4.1 |a| |ii|| | 1 |
| All direction indicators not working both rear |4.4.1 |a| |ii|| | 1 |
| Offside Front Lower Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Centre Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Front shock absorber seal failed and leaking oil both fork seals |2.3.3| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Fuel cap ineffective Sealing washer missing (6.1.3 (b) (i)) | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Lower Chain guard insecure |6.2.1c| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |