| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 22 |
| Headlamp aim out of alignment | 15 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 7 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 5 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 5 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Rear Footrest missing (6.2.12 (a)) | 3 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 3 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 3 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 3 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Front Brake grabbing severely (1.2.1 (c)) | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 2 |
| Offside Front Position lamp not working (4.2.1 (a)) | 2 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 2 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
| Front Brake disc contaminated (1.1.14 (b)) | 2 |
| Brake master cylinder leaking (1.1.10 (b) (ii)) | 2 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 2 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Rear Drive chain horseshoe locking device incorrectly fitted FITTED BACKWARDS (6.1.7 (j) (i)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Stop lamp not working Front brake (4.3.1 (a) (ii)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied bolt/not |1.1.2 |d|| | 1 |
| Registration plate issues | 1 |
| Rear Brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Steering linkage locking device ineffective (2.1.3 (d)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Steering linkage locking device missing (2.1.3 (d)) | 1 |
| Nearside Handlebar fouling on the fuel tank or bodywork on full lock fouling frame (2.1.4 (b)) | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock o/s lock stop missing. (2.1.4 (b)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Brake disc contaminated fork oil |1.1.14 |b|| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Brake pedal has insufficient reserve travel brake pedal (1.1.2 (a)) | 1 |
| Brake master cylinder insecure screws loose on resovior cap (1.1.10 (c)) | 1 |
| Rear Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
| Stop lamp not working via rear brake (4.3.1 (a) (ii)) | 1 |
| Front Brake disc contaminated oil from fork seal (1.1.14 (b)) | 1 |
| Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |
| Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Headlamp not working on main beam not fitted but exceeds more than 30mph (4.1.1 (a) (ii)) | 1 |
| Vehicle identification number has more than one different number displayed |0.2 |c|| | 1 |
| Front Brake hose excessively stretched (1.1.12 (b) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Central Rear Upper Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Nearside Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Central Front Upper Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Nearside Rear Lower Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Nearside Front Upper Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake cylinder has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
| Nearside Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Offside Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front Shock absorber has a serious fluid leak fork seal blown (5.3.2 (b)) | 1 |
| Rear Exhaust has a major leak of exhaust gases not fitted properly (6.1.2 (a)) | 1 |
| Front Direction indicator likely to become detached loose and spinning around (4.4.1 (c) (ii)) | 1 |
| Front Fork yoke fractured stops are missing from bottom yoke (2.2.2 (d) (i)) | 1 |
| Nearside Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Brake disc contaminated covered with fork oil (1.1.14 (b)) | 1 |
| Central Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Wheel alignment incorrect which adversely affects the steering front forks appear to be missaligned within yolk (2.4 (a)) | 1 |
| Shock absorber has a serious fluid leak both front forks (5.3.2 (b)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Offside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Headlamp not working on dipped beam intermittant (4.1.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect kick up to right (4.1.2 (c)) | 1 |
| Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear brake disc in such a condition that it is seriously weakened | 1 |
| Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Nearside Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
| Exhaust has a major leak of exhaust gases at front pipe (6.1.2 (a)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected steering so stiff forks can hardly be moved side to side (2.2.2 (f) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Brake lever is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure faring insecure (6.1.1 (b) (i)) | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link |6.2.1h| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Drive chain horseshoe locking device likely to become detached |6.1.7 |j| |ii|| | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock lock stop missing (2.1.4 (a)) | 1 |
| Front Brake lever insecure LOCK NUT MISSING OFF THE PIVOT BOLT (1.1.2 (e) (i)) | 1 |
| Front Throttle operating incorrectly ENGINE REVING ON FULL RIGHTHAND LOCK (6.2.7 (a) (i)) | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Steering headbearing has excessive wear or free play TOP YOKE MAIN NUT INSECURE (2.2.2 (f) (i)) | 1 |
| Front Wheel excessively distorted 4MM RUNOUT (2MM THE LIMIT) (5.2.2 (c) (i)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort BRAKE DISC WARPED (1.2.1 (e)) | 1 |
| Front Headlamp aim projected beam image obviously incorrect NO PATTERN AT ALL (4.1.2 (c)) | 1 |
| Front Brake component modification unsafe BRAKE DISC MOUNTING NOT SAFE (1.1.21 (d) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Nearside Suspension arm mounting has an unsafe modification footrest rubbing/fowling swingarm (5.3.3 (c) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Rear Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear Exhaust system insecure |6.1.2 |a|| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |