Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 340 |
Registration plate lamp issues | 312 |
Brake pipe excessively corroded | 274 |
Headlamp aim out of alignment | 220 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 190 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 189 |
Brakes imbalanced across an axle | 185 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 120 |
Brake hose excessively deteriorated | 98 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 87 |
Offside Front position lamp|s| not working |1.1.A.3b| | 74 |
Registration plate issues | 73 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 72 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 72 |
Rear parking brake recording little or no effort | 72 |
Parking brake: efficiency below requirements |3.7.B.7| | 71 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 70 |
Exhaust system not adequately supported |7.1.1| | 70 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 67 |
Exhaust has a major leak of exhaust gases |7.1.2| | 66 |
Battery insecure |1.9.1| | 60 |
Nearside Stop lamp not working |1.2.1b| | 58 |
Offside Rear fog lamp not working |1.3.2b| | 57 |
Offside Stop lamp not working |1.2.1b| | 53 |
Rear brake application uneven | 52 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 51 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 51 |
Service brake: efficiency below requirements |3.7.B.7| | 50 |
Offside front brake binding |3.7.B.1| | 50 |
Offside rear brake recording little or no effort |3.7.B.5a| | 50 |
Rear brake binding | 44 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 43 |
Hazard warning switch faulty |1.4.B.1d| | 41 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 41 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 40 |
Rear Exhaust system not adequately supported |7.1.1| | 40 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 40 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 39 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 38 |
Offside Steering rack gaiter split |2.2.D.2d| | 37 |
Front brake application uneven | 37 |
Nearside front brake binding |3.7.B.1| | 37 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 35 |
Nearside Steering rack gaiter split |2.2.D.2d| | 35 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 35 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 34 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 33 |
Direction indicators not working |1.4.A.2c| | 33 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 33 |
Centre Exhaust system not adequately supported |7.1.1| | 32 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 31 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 30 |
Nearside Side repeater not working |1.4.A.2c| | 29 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 28 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 27 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 27 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 27 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 27 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 27 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 27 |
Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 26 |
Offside Front front brake binding |3.7.B.1| | 26 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 26 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 25 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 25 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 25 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 25 |
Front brake disc in such a condition that it is seriously weakened | 24 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 23 |
Offside Front brake disc excessively pitted |3.5.1h| | 21 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 21 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
Parking brake lever has no reserve travel |3.1.6b| | 21 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 21 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 21 |
Rear fog lamp tell tale not working |1.3.1b| | 20 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 20 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 20 |
Nearside Rear Stop lamp not working |1.2.1b| | 20 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 19 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 19 |
Offside Headlamp not working on dipped beam |1.7.5a| | 19 |
Offside Side repeater not working |1.4.A.2c| | 19 |
Exhaust mounting missing |7.1.1b| | 19 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 19 |
Emissions not tested |7.0| | 19 |
Offside Rear Rear fog lamp not working |1.3.2b| | 18 |
Nearside Front brake disc excessively pitted |3.5.1h| | 18 |
Windscreen wiper blade insecure | 18 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 18 |
Horn not working |1.6.2a| | 18 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
Nearside Front front brake binding |3.7.B.1| | 17 |
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 17 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 16 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 16 |
Rear fog lamp not working |1.3.2b| | 16 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 16 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 16 |
Nearside Front Direction indicator not working |1.4.A.2c| | 15 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 15 |
Mechanical brake component has restricted free movement | 15 |
Offside Rear Stop lamp not working |1.2.1b| | 14 |
Hazard warning lamps inoperative |1.4.B.1b| | 14 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 14 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 14 |
Windscreen has damage | 14 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 14 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 13 |
Offside Side repeater incorrect colour |1.4.A.2f| | 13 |
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 13 |
Rear Exhaust mounting missing |7.1.1b| | 13 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 13 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 13 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 13 |
Front Exhaust system not adequately supported |7.1.1| | 12 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 12 |
Nearside Headlamp not working on main beam |1.7.5a| | 12 |
Offside Headlamp not working on main beam |1.7.5a| | 12 |
Driver`s seat insecure |6.2.A.1| | 12 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 12 |
Rear Rear fog lamp not working |1.3.2b| | 12 |
Windscreen washer not working | 12 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 12 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 11 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 11 |
Nearside Side repeater incorrect colour |1.4.A.2f| | 11 |
Offside Rear Direction indicator not working |1.4.A.2c| | 11 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 11 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 11 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 11 |
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 11 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 11 |
Offside Rear wheel bearing has excessive play |2.6.2| | 11 |
Rear Brake load sensing valve linkage seized |3.6.E.3| | 11 |
Centre Exhaust mounting missing |7.1.1b| | 10 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 10 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 10 |
Brake pedal spongy |3.3.B.1b| | 10 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 10 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 10 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 10 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 10 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 10 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 10 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 10 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 9 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 9 |
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 9 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 9 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 9 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 9 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
Brake hose has insufficient room to move | 9 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 9 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 9 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 9 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 9 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 8 |
Stop lamp(s) all not working (4.3.1 (a) (iii)) | 8 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 8 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 8 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 8 |
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 8 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 8 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 8 |
Stop lamp not working |1.2.1b| | 8 |
Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 8 |
Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
Offside Front Side repeater incorrect colour |1.4.A.2f| | 7 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 7 |
Offside Front Position lamp not working |4.2.1 |a|| | 7 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 7 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 7 |
Nearside Front Position lamp not working |4.2.1 |a|| | 7 |
Offside Front Brake pipe inadequately clipped |3.6.B.1| | 7 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 7 |
Nearside Headlamp insecure |1.7.3| | 7 |
Brake load sensing valve seized |3.6.E.3| | 7 |
Offside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 7 |
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 7 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 7 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 7 |
Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 7 |
Brake hose damaged | 7 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 7 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 7 |
Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 7 |
Nearside Front Side repeater not working |1.4.A.2c| | 7 |
Front brake excessively fluctuating | 7 |
Fuel cap/sealing device sealing washer deteriorated |7.2.4c| | 6 |
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 6 |
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 6 |
Offside Front Side repeater not working |1.4.A.2c| | 6 |
Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 6 |
Offside Rear Rear wheel bearing has excessive play |2.6.2| | 6 |
Front passenger seat insecure |6.2.3| | 6 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 6 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 6 |
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 6 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 6 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 6 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 6 |
Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Brake performance not tested |3.7.A.1| | 6 |
Nearside Front Direction indicators not working |1.4.A.2c| | 6 |
Offside Steering arm has relative movement at its fixings |2.2.B.1h| | 6 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 6 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 6 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 6 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Nearside Front wheel bearing rough when rotated |2.5.A.2| | 6 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 6 |
Parking brake: efficiency below requirements |3.7.C.1b| | 6 |
Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 6 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 6 |
Brake load sensing valve linkage seized |3.6.E.3| | 6 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 6 |
Front Body has a sharp edge caused by corrosion |6.1.C.1| | 6 |
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 6 |
Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 6 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 6 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Offside Front Headlamp not working on main beam |1.7.5a| | 6 |
Nearside Side repeater insecure |1.4.A.2b| | 6 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 6 |