Most common failures | No# failures |
---|
Registration plate lamp issues | 18 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 12 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
Headlamp aim out of alignment | 11 |
Brakes imbalanced across an axle | 10 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 8 |
Windscreen wiper does not clear the windscreen effectively | 8 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
Brake pipe excessively corroded | 8 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 7 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 7 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Parking brake: efficiency below requirements |3.7.B.7| | 7 |
Battery insecure |1.9.1| | 6 |
Nearside Stop lamp not working |1.2.1b| | 6 |
Exhaust system not adequately supported |7.1.1| | 6 |
Nearside Front Direction indicator not working |1.4.A.2c| | 5 |
Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 5 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Rear brake application uneven | 4 |
Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 4 |
Service brake: efficiency below requirements |3.7.B.7| | 4 |
Rear fog lamp not working |1.3.2b| | 4 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Offside Rear fog lamp missing |1.3.2a| | 3 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear fog lamp tell tale not working |1.3.1b| | 3 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
Offside Stop lamp not working |1.2.1b| | 3 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Nearside Front Direction indicators not working |1.4.A.2c| | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 3 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 3 |
Offside Steering rack gaiter split |2.2.D.2d| | 2 |
Rear fog lamp missing |1.3.2a| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Front Position lamp not working |4.2.1 |a|| | 2 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 2 |
Nearside Exhaust system not adequately supported |7.1.1| | 2 |
Offside Front Direction indicators not working |1.4.A.2c| | 2 |
Offside Rear Direction indicators not working |1.4.A.2c| | 2 |
Nearside Rear Direction indicators not working |1.4.A.2c| | 2 |
Brake performance not tested |3.7.A.1| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 2 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 2 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 2 |
Registration plate issues | 2 |
Front Sub-frame corroded and seriously weakened |2.4.G.1| | 2 |
Horn not working |1.6.2a| | 2 |
Windscreen washer not working | 2 |
Headlamp aim beam image kick up to the offside |1.8| | 2 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 2 |
Hazard warning switch faulty |1.4.B.1d| | 2 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Brake hose excessively deteriorated | 2 |
Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Inner Front Lower Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front Suspension arm attachment bracket/mounting insecure |2.4.G.1| | 1 |
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Suspension component pin or bush excessively worn tie rod (5.3.4 (a) (i)) | 1 |
Offside Front Suspension component pin or bush excessively worn tie rod (5.3.4 (a) (i)) | 1 |
Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Rear parking brake recording little or no effort | 1 |
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength on chassis leg next to suspension mounting |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to suspension mounting |5.3.6 |a| |i|| | 1 |
Nearside Front Service brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Emissions not tested |7.0| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Windscreen wiper blade insecure | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Nearside Direction indicators not working |1.4.A.2c| | 1 |
Offside Direction indicators not working |1.4.A.2c| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Front Torsion bar attachment bracket corroded and seriously weakened |2.4.E.4c| | 1 |
Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside front parking brake recording little or no effort |3.7.B.6a| | 1 |
Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
Offside Front Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Obligatory mirror insecure |8.1.1| | 1 |
Rear Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Statutory seat belt missing |5.1.1| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
Emissions not tested overheating |7.3.A.1| | 1 |
Nearside Front Inner Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Inner Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Outer Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded floor pan |2.4.A.3| | 1 |
Emissions not tested over heating |7.3.A.1| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired outer sill |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded front of o/s/r inner arch |2.4.A.3| | 1 |
Offside Front Floor excessively deteriorated |6.2.4 |a| |i|| | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Offside Rear Suspension component fractured |5.3.3 |b| |ii|| | 1 |
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in floor (6.1.1 (c) (i)) | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear passenger door cannot be opened from outside the vehicle |6.2.B.1c| | 1 |
Nearside Rear Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Main beam `tell-tale` not working |1.7.4c| | 1 |
Headlamp aim beam image kick up to the offside N/S & O/S |1.8| | 1 |
Speedometer cannot be illuminated. |6.7.3| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Front Suspension component mounting prescribed area is excessively corroded N/S & O/S |2.4.A.3| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt N/S & O/S |2.2.C.1c| | 1 |
Offside Steering component damaged and unserviceable track rod nut cut |2.2.C.1d| | 1 |
Nearside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Rear Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Rear Valve stem seriously misaligned |4.1.D.1e| | 1 |
Nearside Headlamp does not operate immediately when selected on dipped beam |1.7.4a| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Headlamps matched pair are not the same colour |1.7.6| | 1 |
Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
Centre Obligatory mirror missing |8.1.1| | 1 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Steering wheel retaining device insecure |2.1.6| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
Nearside Front Upper Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Upper Ball joint has excessive play |2.2.B.1f| | 1 |
Rear Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Offside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
Nearside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Lower Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Offside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Fluid leak harmful to the environment or a risk to other road users fuel leak (8.4.1 (a) (i)) | 1 |
Emissions not tested fuel leak (8.2.1.2 (d)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Headlamp incorrect colour |1.7.5b| | 1 |
Offside Headlamp incorrect colour |1.7.5b| | 1 |
Nearside Front Exhaust has a major leak of exhaust gases under wing |6.1.2 |a|| | 1 |
Nearside Rear Upper Shock absorbers likely to become detached |5.3.2 |a| |ii|| | 1 |
Nearside Front Lower Suspension arm pin or bush excessively worn front stabliser arm |5.3.4 |a| |i|| | 1 |
Rear Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Fuel tank leaking drain plug seal |7.2.3| | 1 |
Steering rack insecure |2.2.B.1a| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
Offside Front Direction indicator incomplete |1.5.A1b| | 1 |
Offside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c)) | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner arch where brake and accelerator is bolted |6.1.1 |c| |ii|| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner panel |front arch| |6.1.1 |c| |i|| | 1 |
Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced centre floor / inner arch hole |6.1.1 |c| |i|| | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired outer arch |6.2.2 |d| |ii|| | 1 |
Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inside engine bay |6.1.1 |c| |i|| | 1 |
Nearside Front Position lamp not working |4.2.1 |a| |ii|| | 1 |
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Offside Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired floor under drivers seat |6.2.2 |d| |ii|| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside rear brake juddering severely |3.7.A.5b| | 1 |
Offside rear brake juddering severely |3.7.A.5b| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor / inner arch (6.1.1 (c) (i)) | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced floor / inner arch (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill / inner arch (6.1.1 (c) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced corroded / hole in floor (6.1.1 (c) (i)) | 1 |
Offside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Nearside Front Position lamp adversely affected by the operation of another lamp bad earth (4.2.3 (c)) | 1 |
Nearside Rear Position lamp adversely affected by the operation of another lamp bad earth (4.2.3 (c)) | 1 |
Offside Rear Position lamp adversely affected by the operation of another lamp bad earth (4.2.3 (c)) | 1 |
Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Bootlid cannot be secured in the closed position |6.4.1| | 1 |
Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
Offside Body has a sharp edge caused by damage door handle |6.1.C.1| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Rear brake binding | 1 |
Offside Obligatory mirror missing |8.1.1| | 1 |
Nearside Front Position lamp not working bul207 + loose connection (4.2.1 (a) (ii)) | 1 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Inner Obligatory mirror missing |8.1.1| | 1 |
Offside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |