Most common failures | No# failures |
---|
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Nearside Headlamp not working on main beam |1.7.5a| | 3 |
Offside Headlamp not working on main beam |1.7.5a| | 3 |
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 3 |
Rear parking brake recording little or no effort | 3 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Rear fog lamp tell tale not working |1.3.1b| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 2 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Registration plate lamp issues | 2 |
Service brake: efficiency below requirements |3.7.B.7| | 2 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Lower Steering pivot point has excessive play |2.2.B.1g| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
Headlamp aim out of alignment | 1 |
Stop lamp not working |1.2.1b| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Front brake disc excessively pitted |3.5.1h| | 1 |
Offside Rear reflector missing |1.5.1a| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Exhaust has a part missing |7.1.1a| | 1 |
Offside Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Offside Headlamp aim not tested |1.8.A.1c| | 1 |
Horn not working |1.6.2a| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Brake performance not tested |3.7.A.1| | 1 |