MOT History from tests of petrol QINGQI QM125-2Vs year 2009

Review the list of common QINGQI QM125-2V failures below or to perform a specific mot history check on your QINGQI then use our popular KnowYourCar service

mot history

Pass percent:58.33%

(The average a petrol QINGQI QM125-2V year 2009 passes without issue)

Based on:36 MOT Tests

Most common failures	No# failures
Rear Brake locking device missing \|3.2.A1e\|	3
Headlamp aim out of alignment	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
An item not tested \|Manual\|	2
Drive chain excessively loose \|6.2.1d\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front mudguard insecure \|2.3.7\|	1
Chain guard insecure \|6.2.1c\|	1
Offside Steering lock stop ineffective \|2.1.3\|	1
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Handlebar deformed \|2.1.1b\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Drive chain worn to excess \|6.2.1e\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Rear Brake locking device insecure \|3.2.A1e\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Drive chain excessively loose \|6.2.1d\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Fuel system component leaking @ fuel switch \|7.2.1a\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Rear wheel bearings are excessively rough \|2.4.A.2c\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Chain guard insecure missing \|6.2.1c\|	1
Fuel cap does not fasten securely maintaining the sealing arrangement temp cap leaking \|7.2.2b\|	1
Brake pedal insecure \|3.1.2a\|	1
Registration plate issues	1
Rear position lamp insecure \|1.1.1c\|	1
Stop lamp insecure \|1.3.3b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear Brake locking device missing \|3.2.A1e\|	3
Headlamp aim out of alignment	3
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
An item not tested \|Manual\|	2
Drive chain excessively loose \|6.2.1d\|	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front mudguard insecure \|2.3.7\|	1
Chain guard insecure \|6.2.1c\|	1
Offside Steering lock stop ineffective \|2.1.3\|	1
Rear Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Handlebar deformed \|2.1.1b\|	1
Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Steering headbearing has excessive free play \|2.2.2\|	1
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Drive chain worn to excess \|6.2.1e\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Rear Brake locking device insecure \|3.2.A1e\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Drive chain excessively loose \|6.2.1d\|	1
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Fuel system component leaking @ fuel switch \|7.2.1a\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Rear wheel bearings are excessively rough \|2.4.A.2c\|	1
Rear Drive chain excessively loose \|6.2.1d\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Chain guard insecure missing \|6.2.1c\|	1
Fuel cap does not fasten securely maintaining the sealing arrangement temp cap leaking \|7.2.2b\|	1
Brake pedal insecure \|3.1.2a\|	1
Registration plate issues	1
Rear position lamp insecure \|1.1.1c\|	1
Stop lamp insecure \|1.3.3b\|	1

MOT History from tests of petrol QINGQI QM125-2Vs year 2009

Find us on Facebook