MOT History from tests of petrol QINGQI QM125-2DSTEALTHs year 2011

Review the list of common QINGQI QM125-2DSTEALTH failures below or to perform a specific mot history check on your QINGQI then use our popular KnowYourCar service

mot history

Pass percent:50.91%

(The average a petrol QINGQI QM125-2DSTEALTH year 2011 passes without issue)

Based on:55 MOT Tests

Most common failures	No# failures
Drive chain excessively loose \|6.2.1d\|	6
Headlamp aim out of alignment	5
Brake hose excessively deteriorated	4
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Drive chain fouling another component \|6.2.1d\|	1
Lower Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear wheel rotation likely to be impeded by loose and insecure rear mudguard/fairing \|6.2.1b\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Nearside Handlebar deformed \|2.1.1b\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Drive chain sprocket worn to excess \|6.1.7 \|c\| \|i\|\|	1
Drive chain worn to excess \|6.1.7 \|c\| \|i\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Brake pedal insecure \|1.1.2 \|e\| \|i\|\|	1
Rear Suspension attachment bracket/mounting insecure \|5.3.3 \|a\| \|i\|\|	1
Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Front Brake disc\|s\| cracked l/h \|3.2.A1g\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Rear mono-shock insecure \|2.4.B.4\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Drive chain excessively loose \|6.2.1d\|	6
Headlamp aim out of alignment	5
Brake hose excessively deteriorated	4
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Nearside Rear Direction indicator not working \|1.5.1c\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Rear wheel bearings have excessive free play \|2.4.A.2c\|	1
Drive chain fouling another component \|6.2.1d\|	1
Lower Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear wheel rotation likely to be impeded by loose and insecure rear mudguard/fairing \|6.2.1b\|	1
Front Drive chain sprocket worn to excess \|6.2.1e\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Nearside Handlebar deformed \|2.1.1b\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Drive chain sprocket worn to excess \|6.1.7 \|c\| \|i\|\|	1
Drive chain worn to excess \|6.1.7 \|c\| \|i\|\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	1
Rear reflector missing \|4.8.2 \|a\| \|ii\|\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Brake pedal insecure \|1.1.2 \|e\| \|i\|\|	1
Rear Suspension attachment bracket/mounting insecure \|5.3.3 \|a\| \|i\|\|	1
Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	1
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	1
Front Brake disc\|s\| cracked l/h \|3.2.A1g\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Exhaust is leaking and excessively noisey \|7.1.1b\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Nearside Rear Footrest missing \|6.2.1a\|	1
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	1
Rear mono-shock insecure \|2.4.B.4\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1

MOT History from tests of petrol QINGQI QM125-2DSTEALTHs year 2011

Find us on Facebook