>

MOT History from tests of petrol QINGQI QM125-2Cs year 2011

Review the list of common QINGQI QM125-2C failures below or to perform a specific mot history check on your QINGQI then use our popular KnowYourCar service

mot history
Pass percent:67.31%
(The average a petrol QINGQI QM125-2C year 2011 passes without issue)
Based on:52 MOT Tests
Most common failuresNo# failures
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Drive chain excessively loose |6.2.1d|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Headlamp aim out of alignment2
Registration plate issues2
Drive chain excessively loose (6.1.7 (c) (i))1
Rear Stop lamp not working Switch and actuating cable missing |4.3.1 |a| |ii||1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Horn not working |1.7.3a|1
Nearside Front Direction indicator insecure |1.5.3b|1
Offside Front Direction indicator insecure |1.5.3b|1
Nearside Rear Direction indicator insecure |1.5.3b|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Wheel alignment incorrect which adversely affects the steering |2.5.1|1
Rear Drive chain sprocket carrier worn to excess |6.2.1e|1
Brake cable has a significantly damaged outer casing. |3.2.A1b|1
Steering headbearing has excessive free play |2.2.2|1
Registration plate lamp issues1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Exhaust mounting does not fully support the exhaust system silencer mount |7.1.1.c|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Front Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Front position lamp adversely affected by the operation of another lamp |1.1.3b|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Drive chain sprocket worn to excess |6.2.1e|1
Offside Rear Direction indicator not working |1.5.1c|1
Headlamp aim headlamp deteriorated and function impaired weak image not reaching beamsetter |1.2.3a|1
Brake grabbing severely (1.2.1 (c))1
Front Position lamp not working |4.2.1 |a||1
Stop lamp not working foot pedal |4.3.1 |a| |ii||1
Rear Direction indicator incorrect colour both |4.4.3 |a||1
Offside Rear Direction indicators not working |1.5.1c|1
Nearside Lower Drive chain excessively loose |6.2.1d|1
Offside Rear Lower Roller brake test indicates a binding brake |3.3.A1a|1
Offside Rear Lower Roller brake test indicates a sticking brake |3.3.A1a|1
Central Front Headlamp insecure The side light mount has excess movement. |1.2.3b|1
Rear Exhaust mounting missing |7.1.1c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy