| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 41 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 18 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 14 |
| Drive chain worn to excess |6.2.1e| | 13 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Rear reflector on motorcycle missing |1.4.1| | 11 |
| Steering headbearing has excessive free play |2.2.2| | 10 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
| Registration plate issues | 8 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
| Horn not working |1.7.3a| | 7 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Front wheel bearings are excessively rough |2.3.5b| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Drive chain excessively tight |6.2.1d| | 5 |
| Nearside Rear Direction indicator not working |1.5.1c| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
| Nearside Front Direction indicator not working |1.5.1c| | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Brake hose damaged | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Rear Wheel spoke excessively loose |4.2.1b| | 3 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
| Front Wheel spoke excessively loose |4.2.1b| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Registration plate lamp issues | 3 |
| Offside Front Direction indicator not working |1.5.1c| | 3 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 3 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
| Headlamp insecure |1.2.3b| | 3 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Exhaust system insecure (6.1.2 (a)) | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Rear Brake lever mounting insecure |3.1.2a| | 2 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
| Fuel system component insecure |7.2.1b| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Footrest missing |6.2.1a| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front Front mudguard insecure |2.3.7| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Offside Direction indicators not working |1.5.1c| | 2 |
| Nearside Front Direction indicator insecure |1.5.3b| | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Rear wheel rotation likely to be impeded Brake drum securing bar fouling rear wheel |6.2.1b| | 1 |
| Central Rear Upper Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Offside Front Upper Brake component leaking fluid master cylinder leaking fluid |3.2.B4| | 1 |
| Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
| Rear Direction indicator obviously incorrectly positioned fitted in rear combination lamp |4.4.3 |a|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Steering headbearing has excessive wear or free play with wheel raised |2.2.2 |f| |i|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Steering headbearing has excessive free play top steering lock nut loose and excessive play in head bearings |2.2.2| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Brake cable badly frayed |3.2.A1b| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working from front brake (4.3.1 (a) (ii)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Brake component inadequately mounted Rear brake torque arm split pins missing (1.1.21 (c)) | 1 |
| Suspension component ball joint excessively worn Swing arm bushes (5.3.4 (a) (i)) | 1 |
| All direction indicators incorrect colour |4.4.3 |a|| | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Brake lever pivot has excessive free play |1.1.1 |b|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Upper Rear suspension bush has excessive free play shock |2.4.A2a|i|| | 1 |
| Rear Lower Rear suspension bush has excessive free play shock |2.4.A2a|i|| | 1 |
| Rear Stop lamp insecure rear lamp assy |1.3.3b| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Wheel alignment incorrect which adversely affects the handling rear suspension / engine insecure | play at rear wheel | |2.5.1| | 1 |
| Rear suspension bush has excessive free play engine assembly insecure |2.4.A2a|i|| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Handlebar so insecure it is likely to become detached Likely to spin round (2.2.1 (b) (ii)) | 1 |
| Offside Footrest insecure Pillion (6.2.12 (a)) | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Fuel cap missing (6.1.3 (b) (i)) | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Horn not working horn operates high beam and is intermittent (7.7 (a)) | 1 |
| Brake component inadequately mounted securing split pins missing (1.1.21 (c)) | 1 |
| Horn missing |1.7.1| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Rear position lamp incorrect colour |1.1.2b| | 1 |
| Offside Rear position lamp incorrect colour |1.1.2b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Brake lever has inadequate reserve travel rear |3.1.3b| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Footrest missing |6.2.12 |a|| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Central Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Central Rear Lower Rear suspension component misaligned |2.4.A.1a| | 1 |
| Central Rear Upper Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies rear brake leaver |1.3.1a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake component leaking fluid brake resorvoir |3.2.B4| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Roller brake test indicates a binding brake front |3.3.A1a| | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Rear Roller brake test indicates a binding brake rear wheel bearings not tested |3.3.A1a| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Offside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Centre Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Offside Front Steering lock stop missing |2.1.3| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Steering lock stop missing |2.1.3| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Throttle operating incorrectly Throttle control loose |6.2.1f| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Wheel spoke missing |4.2.1b| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Nearside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Throttle operating incorrectly sticking |6.2.1f| | 1 |
| Rear suspension bearing has excessive free play bottom shock bearing |2.4.A2a|i|| | 1 |
| Rear Brake hose leaking fluid |3.2.B4| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Indicator switch defective |1.5.4| | 1 |
| Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Headlamp light intensity severely reduced New bulb required? |4.1.4 |a|| | 1 |
| Offside Rear Brake fluid reservoir fluid not visible |1.1.10 |d| |iii|| | 1 |
| Front Brake disc insecure Apply front brake and rock forward this causes the disc to move |1.1.14 |a| |ii|| | 1 |
| Offside Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Front Brake hose which buldges |3.2.B4| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Direction indicator not working front and rear |1.5.1c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Brake lever mounting cracked |3.1.2c| | 1 |
| Centre Lower Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Fork yoke insecure (2.2.2 (d) (i)) | 1 |
| Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
| Rear Brake lever excessively worn (1.1.15 (b)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Footrest missing both sides missing exhaust boled to offside mount (6.2.12 (a)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear wheel rotation likely to be impeded rear mudguard inscure |6.2.1b| | 1 |
| Nearside Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Fairings insecure and likely to impede the steering front mud guard inscure |2.1.2e| | 1 |
| Fuel system component insecure fuel tank inscure |7.2.1b| | 1 |
| Fuel system component leaking carb |7.2.1a| | 1 |
| Rear suspension bearing has excessive free play swingarm |2.4.A2a|i|| | 1 |
| Rear suspension bush has excessive free play shock linkage |2.4.A2a|i|| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split link |6.2.1h| | 1 |
| Nearside Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Offside Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded rear caliper bracket fouling disc |3.2.A1h| | 1 |
| Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort front lever weak pressure |3.3.A1c| | 1 |
| Rear reflector on motorcycle insecure |1.4.2c| | 1 |
| Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Wheel spoke excessively loose |4.2.1b| | 1 |
| Suspension component pin or bush excessively worn Shock lower (5.3.4 (a) (i)) | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear stop lamp does not work on footbrake |1.3.1a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |