Most common failures | No# failures |
---|
Headlamp aim out of alignment | 26 |
Registration plate lamp issues | 18 |
Rear reflector missing (4.8.2 (a) (ii)) | 13 |
Rear reflector missing |4.8.2 |a| |ii|| | 13 |
Registration plate issues | 11 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Drive chain excessively loose |6.2.1d| | 8 |
Drive chain excessively loose (6.1.7 (c) (i)) | 8 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 6 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear reflector on motorcycle obscured |1.4.2b| | 5 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 5 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 4 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 4 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
Drive chain worn to excess (6.1.7 (c) (i)) | 4 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 4 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Drive chain worn to excess |6.1.7 |c| |i|| | 4 |
Rear Position lamp not working (4.2.1 (a)) | 4 |
Headlamp insecure |4.1.1 |c|| | 3 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 3 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 3 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Headlamp insecure (4.1.1 (c)) | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Horn not working (7.7 (a)) | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Rear Footrest missing (6.2.12 (a)) | 3 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Footrest missing |6.2.12 |a|| | 2 |
Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Headlamp aim not tested (4.1.2 (b)) | 2 |
Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Direction indicators flashing more than 120 times per minute all |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Drive chain excessively tight |6.1.7 |k| |i|| | 2 |
Horn not working |1.7.3a| | 2 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 2 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Brake disc contaminated |1.1.14 |b|| | 2 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
Handlebar excessively deformed (2.2.1 (c) (i)) | 2 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
Front Wheel spoke excessively loose |5.2.2 |d|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Nearside Rear Footrest missing pillion hand handle missing (6.2.12 (a)) | 1 |
Rear Brake pivot excessively worn brake lever centre bush (1.1.15 (b)) | 1 |
Rear Brake clevis joint excessively worn brake pedal clevis pin worn (1.1.15 (b)) | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front Stop lamp not working intermittent - comes on then goes off as lever pulled |4.3.1 |a| |ii|| | 1 |
Front Brake linkage excessively corroded brake cannot be applied smoothly |1.1.15 |b|| | 1 |
Nearside Front Footrest insecure locking clip missing |6.2.12 |a|| | 1 |
Offside Front Footrest insecure locking clip missing |6.2.12 |a|| | 1 |
Drive chain horseshoe locking device incorrectly fitted wrong way round |6.1.7 |j| |i|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected insecure on handlebars |6.2.7 |a| |ii|| | 1 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Upper Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Nearside Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Suspension arm pin or bush excessively worn mono shock pivot (5.3.4 (a) (i)) | 1 |
Rear Brake hose leaking Caliper copper washer (1.1.12 (c)) | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Stop lamp not working front brake stop light |4.3.1 |a| |ii|| | 1 |
Wheel bearing has excessive play rear wheel bearings |5.1.3 |a| |i|| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Brake linkage clevis joint excessively worn rear brake pedal clevis pin |3.2.A1d| | 1 |
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Central Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Rear reflector defective or damaged by more than 50% of the reflecting surface |4.8.1 |a| |ii|| | 1 |
Nearside Front Footrest insecure (6.2.12 (a)) | 1 |
Front Forks insecure (2.2.2 (d) (i)) | 1 |
Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Brake pipe union leaking fluid |3.2.B4| | 1 |
Brake pedal has inadequate reserve travel rear |3.1.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock left lock |2.1.4| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp does not illuminate immediately a brake applies rear switch |1.3.1a| | 1 |
Stop lamp does not emit a steady light front switch |1.3.1b| | 1 |
Brake indicates excessive fluctuation of brake effort Front (1.2.1 (e)) | 1 |
Brake indicates excessive fluctuation of brake effort Rear (1.2.1 (e)) | 1 |
Shock absorber has an excessively worn bush Lower Rear (5.3.2 (c)) | 1 |
Brake lever insecure Front pivot bolt (1.1.2 (e) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Central Front Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced Engine Mounting Bracket Missing (6.1.1 (b) (ii)) | 1 |
Nearside Rear Direction indicator not working Intermittant fault, possible loose connection inside lamp (4.4.1 (a) (ii)) | 1 |
Position lamp light intensity significantly reduced Front dip beam (4.2.3 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Position lamp switch insecure |4.2.2 |b|| | 1 |
Rear Brake hose leaking |1.1.12 |c|| | 1 |
Rear Lower Suspension rod ball joint excessively worn shock absorber mount |5.3.4 |a| |i|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure Clutch lever housing (6.1.1 (b) (i)) | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
Rear Footrest missing both (6.2.12 (a)) | 1 |
Nearside Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Suspension arm missing swinging arm loose |5.3.3 |a| |ii|| | 1 |
Position lamp switch does not illuminate all position lamps with a single operation |4.2.2 |a|| | 1 |
Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Offside Throttle operating incorrectly throttle/switch assy loose on handlebars (6.2.7 (a) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Front Stop lamp light intensity significantly reduced affected by brake lever |4.3.3 |a| |ii|| | 1 |
Stop lamp not working front lever and pedal (4.3.1 (a) (ii)) | 1 |
Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 1 |
Vehicle identification number not legible corroded |0.2 |b|| | 1 |
Stop lamp not working rear switch |4.3.1 |a| |ii|| | 1 |
Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Nearside Front Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Nearside Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Offside Rear Brake indicates excessive fluctuation of brake effort brake pedal bent |1.2.1 |e|| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Headlamp reflector missing (4.1.1 (b) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak fork oil seal leaking |5.3.2 |b|| | 1 |
Front Brake disc contaminated brake disc contaminated with oil |from fork oil seal| |1.1.14 |b|| | 1 |
Rear Brake disc contaminated |1.1.14 |b|| | 1 |
Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear position lamp deteriorated and function impaired less than 50%led working |1.1.1b| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Stop lamp damaged and function impaired less than 50% led working |1.3.3a| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Throttle operating incorrectly sticking |6.2.7 |a| |i|| | 1 |
Offside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Front Stop lamp not working switch (4.3.1 (a) (ii)) | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Central Rear Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Rear wheel spindle securing nut locking device missing Axle adjustment plate missing. |2.4.A.2b| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle increases when steering turned (6.2.7 (a) (ii)) | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Dipswitch does not operate immediately when selected on dipped beam Faulty switch (4.1.3 (b)) | 1 |
Dipswitch does not operate immediately when selected on main beam Faulty switch (4.1.3 (b)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Gradient brake test No brake control achieves an efficiency of 30%. |3.3.D1a| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock lock stop broken off (2.1.4 (b)) | 1 |
Rear Brake master cylinder insecure only one bolt securing it other one broken off (1.1.10 (c)) | 1 |
Nearside Rear All direction indicators incorrect colour White light not amber. (4.4.3 (a)) | 1 |
Central Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Offside Position lamp switch insecure |4.2.2 |b|| | 1 |
Rear Footrest missing both |6.2.12 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Brake master cylinder insecure lower mounting bolt broken |1.1.10 |c|| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Throttle operating incorrectly HOUSING INSECURE |6.2.1f| | 1 |
Rear suspension bush has excessive free play lower shock |2.4.A2a|i|| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Upper Fairings insecure and likely to impede the steering Rear O/Side Panel Insecure and Cracked |2.1.2e| | 1 |
Offside Front Position lamp switch insecure Throttle Switch Insecure |1.1.4b| | 1 |
Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Headlamp incorrect colour (4.1.4 (a)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Front Chain guard insecure missing (6.1.7 (i)) | 1 |
Brake lever insecure Pivot nut missing |3.1.2a| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Hydraulic brake control feels spongy Suspect due to rear calliper being seized on sliders |3.1.4a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Drive chain fouling another component Chain fowls side stand due to faulty stand |6.2.1d| | 1 |
Nearside Front Lower Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Central Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Nearside Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Position lamp light intensity significantly reduced more than half LEDs not working (4.2.3 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Rear Lower Suspension component pin or bush excessively worn Bottom shock bush (5.3.4 (a) (i)) | 1 |
Nearside Indicator switch inoperative indicator switch inoperative |4.4.2 |a| |ii|| | 1 |
Central Front Lower Stop lamp not working Front brake light inoperative |4.3.1 |a| |ii|| | 1 |
Central Rear Stop lamp not working Rear brake light inoperative |4.3.1 |a| |ii|| | 1 |
Front Lower Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake cylinder insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Stop lamp with a multiple light source more than 1/2 not functioning leds not working |4.3.1 |a| |ii|| | 1 |
Rear Position lamp light intensity significantly reduced leds not working |4.2.3 |a| |ii|| | 1 |
Front Brake pipe likely to become detached or damaged insecure |1.1.11 |d| |ii|| | 1 |
Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
Rear Brake excessively binding confirmed by road test |1.2.1 |f|| | 1 |
Headlamp switch faulty high beam not tested |1.2.4| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Offside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride footrest retaining pin |6.2.1h| | 1 |
Exhaust has a major leak of exhaust gases bolt at head snapped (6.1.2 (a)) | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear Direction indicator not working rear left indicator not working (4.4.1 (a) (ii)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Wheel spoke cracked (5.2.2 (d)) | 1 |
Footrest missing rear (6.2.12 (a)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Wheel spoke excessively loose REAR X 5 |4.2.1b| | 1 |
Nearside Direction indicators flashing more than 120 times per minute N/S indicators flashing to fast |1.5.1c| | 1 |
Central Front Headlamp dipped beam affected by the operation of another lamp Headlamp both beams are on Dip Beam |1.2.2c| | 1 |
Front Brake caliper insecure bolt missing (1.1.16 (c) (i)) | 1 |
Rear Stop lamp not working brake (4.3.1 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling front fork or frame bent |2.5.1| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Seat insecure |6.2.1a| | 1 |
Front Stop lamp emits other than a steady red light Front brake light switch not working. |1.3.1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort Rear disc warped |3.3.A1c| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Central Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Direction indicators flashing less than 60 times a minute All |1.5.1c| | 1 |
Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Front Shock absorber has a serious fluid leak fork leg (5.3.2 (b)) | 1 |
Front Motorcycle structure is fractured and structural rigidity is significantly reduced front mudguard |6.1.1 |a| |i|| | 1 |
Rear Lower Suspension arm pin or bush excessively worn rear shock lower bush |5.3.4 |a| |i|| | 1 |
Front Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected |5.2.2 |c| |ii|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Rear Upper Brake master cylinder defective but brake still operating |1.1.10 |b| |i|| | 1 |
Direction indicator deteriorated and function impaired all four indicators do not keep a steady speed flash to fast |1.5.3a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear suspension bush has excessive free play shock linkages |2.4.A2a|i|| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain aduster plate loose |6.2.1h| | 1 |
Steering control handlebar movement restricted by trapped cables wires trapped in steering stop |2.1.2c| | 1 |
Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Throttle operating incorrectly insecure (6.2.7 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Suspension arm attachment bracket/mounting insecure swinging arm mount (5.3.3 (a) (i)) | 1 |
Mechanical brake component has restricted free movement | 1 |
Headlamp not working on main beam |1.7.5a| | 1 |