Most common failures | No# failures |
---|
Headlamp aim out of alignment | 139 |
Brake hose excessively deteriorated | 52 |
Rear brake binding | 35 |
Registration plate lamp issues | 29 |
Windscreen wiper does not clear the windscreen effectively | 25 |
Registration plate issues | 25 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 22 |
Offside Rear fog lamp not working |1.3.2b| | 21 |
Rear fog lamp not working |1.3.2b| | 17 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 16 |
Parking brake: efficiency below requirements |3.7.B.7| | 11 |
Brakes imbalanced across an axle | 10 |
Rear parking brake recording little or no effort | 10 |
Horn not working |1.6.2a| | 10 |
Offside front brake binding |3.7.B.1| | 9 |
Rear Mechanical brake component has restricted free movement | 9 |
Offside Side repeater not working |1.4.A.2c| | 9 |
Windscreen washer not working | 8 |
Rear fog lamp tell tale not working |1.3.1b| | 8 |
Nearside front brake binding |3.7.B.1| | 8 |
Steering column top bearing excessively worn |2.1.2c| | 8 |
Offside Stop lamp not working |1.2.1b| | 8 |
Offside Rear Rear fog lamp not working |1.3.2b| | 7 |
Nearside Stop lamp not working |1.2.1b| | 7 |
Parking brake lever has no reserve travel |3.1.6b| | 7 |
Rear fog lamp not working (4.5.1 (a) (ii)) | 7 |
Service brake: efficiency below requirements |3.7.B.7| | 6 |
Headlamp switch faulty |1.7.1| | 5 |
Offside Headlamp not working on dipped beam |1.7.5a| | 5 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 5 |
Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 4 |
Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 4 |
Nearside Rear Brake hose bulging under pressure |3.6.B.3| | 4 |
Nearside Rear Stop lamp not working |1.2.1b| | 4 |
Battery insecure |1.9.1| | 4 |
Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 4 |
Offside Rear Service brake excessively binding (1.2.1 (f)) | 4 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 4 |
Nearside Headlamp not working on main beam |1.7.5a| | 4 |
Offside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 4 |
Offside Rear Brake hose bulging under pressure |3.6.B.3| | 4 |
Nearside Front Brake hose bulging under pressure |3.6.B.3| | 3 |
Brake performance not tested |3.7.A.1| | 3 |
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 3 |
Offside Steering rack gaiter split |2.2.D.2d| | 3 |
Nearside Rear Drive shaft which forms part of the suspension coupling gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 3 |
Steering column top bearing excessively worn (2.2.2 (b)) | 3 |
Offside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 3 |
Rear brake application uneven | 3 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 3 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 3 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 3 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 3 |
Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 3 |
Nearside Front Direction indicator not working |1.4.A.2c| | 3 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Windscreen has damage | 2 |
Rear fog lamp tell tale not working (1.3.1b) | 2 |
Rear fog lamp not working (1.3.2b) | 2 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
Rear fog lamp switch faulty |1.3.1a| | 2 |
Offside Rear front brake binding |3.7.B.1| | 2 |
Mechanical brake component has restricted free movement | 2 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
Headlamp not working on dipped beam |1.7.5a| | 2 |
Headlamp not working on main beam |1.7.5a| | 2 |
Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 2 |
Nearside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Nearside Side repeater not working (4.4.1 (a) (ii)) | 2 |
Offside Front front brake binding |3.7.B.1| | 2 |
Nearside Rear front brake binding |3.7.B.1| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Rear Rear fog lamp not working |1.3.2b| | 2 |
Nearside Front Service brake excessively binding |1.2.1 |f|| | 2 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 2 |
Offside Rear Stop lamp not working |1.2.1b| | 2 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 2 |
Nearside Rear Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 2 |
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 2 |
Nearside Rear Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
Offside Front Side repeater not working |1.4.A.2c| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Rear Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 2 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Rear Rear passenger seat cannot be secured in the upright position. |6.2.3| | 2 |
Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Brake hose leaking |3.6.A.1| | 2 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Hazard warning switch faulty |1.4.B.1d| | 2 |
Offside Side repeater not working |4.4.1 |a| |ii|| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Hazard warning lamps inoperative (4.4.1 (e)) | 2 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
Nearside Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |