| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 46 |
| Drive chain excessively loose |6.2.1d| | 28 |
| Rear reflector on motorcycle missing |1.4.1| | 20 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 20 |
| Horn not working |1.7.3a| | 19 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
| Registration plate issues | 18 |
| Drive chain worn to excess |6.2.1e| | 16 |
| Front wheel bearings have excessive free play |2.3.5b| | 15 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 14 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 14 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 11 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 10 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 9 |
| Front wheel bearings are excessively rough |2.3.5b| | 9 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 9 |
| Drive chain excessively tight |6.2.1d| | 9 |
| Steering headbearing has excessive free play |2.2.2| | 9 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 8 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
| Rear Wheel spoke excessively loose |4.2.1b| | 7 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 7 |
| Offside Front Footrest insecure |6.2.1a| | 7 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 7 |
| Rear Wheel spoke missing |4.2.1b| | 6 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Nearside Front Footrest insecure |6.2.1a| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 5 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
| Rear reflector on motorcycle obscured |1.4.1| | 5 |
| Offside Rear Footrest missing |6.2.1a| | 5 |
| Riders seat insecure |6.2.1a| | 5 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Nearside Rear Direction indicators not working |1.5.1c| | 5 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Headlamp insecure |1.2.3b| | 4 |
| Nearside Rear Footrest missing |6.2.1a| | 4 |
| Front position lamp incorrect colour |1.1.2a| | 4 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
| Handlebar mounting clamp loose |2.1.1a| | 4 |
| Handlebar deformed |2.1.1b| | 4 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Rear Drive chain worn to excess |6.2.1e| | 4 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 4 |
| Direction indicators not working |1.5.1c| | 3 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Rear Direction indicator missing |1.5.1a| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 3 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Headlamp aim not tested |4.1.2 |b|| | 2 |
| Front Direction indicator missing |1.5.1a| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 2 |
| Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 2 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Drive chain fouling another component |6.2.1d| | 2 |
| Rear Brake pedal insecure |3.1.2a| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Rear suspension component loose |2.4.A.1a| | 2 |
| Front Direction indicator not working |1.5.1c| | 2 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
| Fuel hose leaking |7.2.1a| | 2 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
| Rear Direction indicator insecure |1.5.3b| | 2 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Nearside Footrest insecure |6.2.1a| | 2 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Brake hose excessively deteriorated | 2 |
| Rear Brake pedal is inoperative |3.1.3c| | 2 |
| Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
| Registration plate lamp issues | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| All position lamps not working (4.2.1 (a)) | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake component has an inadequate repair |3.1.5| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake pedal mounting insecure |3.1.2a| | 1 |
| Fuel tank leaking |7.2.1a| | 1 |
| Wheel spoke missing |4.2.1b| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Handlebar handgrip missing |2.1.1c| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
| Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Rear reflector on sidecar obscured |1.4.2b| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Nearside Footrest missing |6.2.1a| | 1 |
| Front Indicator switch insecure |1.5.4| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Offside Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Offside Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Drive chain fouling another component chain guard mounting bolt |6.2.1d| | 1 |
| Chain guard fouling another component mounting bolt fouling chain |6.2.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies brake lever |1.3.1a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Brake fluid reservoir severely damaged |3.2.B1b| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Centre Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Front suspension assembly component loose |2.3.1| | 1 |
| Centre Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Footrest insecure |6.2.1a| | 1 |
| Front Brake pipe excessively chafed |3.2.B2a| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Lower Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Handlebar excessively corroded |2.1.1b| | 1 |
| Headlamp switch faulty high beam |1.2.4| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine mounting bolt/s |6.1.1c| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Seat insecure |6.2.1a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front suspension assembly component missing |2.3.1| | 1 |
| Offside Front Front position lamp insecure |1.1.1c| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Rear wheel bearings are excessively tight |2.4.A.2c| | 1 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Direction indicator incorrect colour |1.5.1b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure brake arm |6.1.1 |b| |i|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Nearside Front Steering lock stop missing |2.1.3| | 1 |
| Offside Front Steering lock stop missing |2.1.3| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure no locking device on brake arm |6.1.1 |b| |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Brake hose damaged | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
| Rear Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Nearside Rear suspension bearing has excessive free play swingarm |2.4.A2a|i|| | 1 |
| Lower Rear suspension bush has excessive free play shock absorber |2.4.A2a|i|| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Indicator tell tale not functioning |1.5.2| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Stop lamp remains on when the brake is released front |1.3.1e| | 1 |
| Front Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Vehicle identification number not displayed |0.2 |a|| | 1 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| All direction indicators missing |4.4.1 |a| |ii|| | 1 |
| Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Headlamp aim not tested |1.6| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Fuel system component insecure tank |7.2.1b| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Brake locking device insecure |3.2.A1e| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Front An item not tested |Manual| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Offside Rear An item not tested |Manual| | 1 |
| Rear Lower Brake locking device insecure |3.2.A1e| | 1 |
| Centre An item not tested |Manual| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Drive chain excessively tight |6.2.1d| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Stop lamp does not illuminate immediately a brake applies front opperation |1.3.1a| | 1 |
| Rear suspension bearing has excessive free play linkage on shockabsorber |2.4.A2a|i|| | 1 |
| Rear suspension bearing has excessive free play swinging arm pivot |2.4.A2a|i|| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Drive chain excessively tight chain too tight and on last of adjustment (6.1.7 (k) (i)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Front All direction indicators obviously incorrectly positioned front indicators hidden by accessory lights barely visible (4.4.3 (a)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Brake master cylinder defective but brake still operating Master cylinder lever lug broken at pivot. (1.1.10 (b) (i)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear Brake lagging in operation (1.2.1 (d)) | 1 |
| Rear Suspension arm ball joint excessively worn Swingarm bushes excess free play (5.3.4 (a) (i)) | 1 |
| Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Nearside Front Dipswitch does not operate immediately when selected on dipped beam Dip beam works sometimes (4.1.3 (b)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Front Stop lamp not working Not operating from front break (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working Not operating from rear break (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Upper Engine mounting/bracket excessively loose (6.1.8 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Fork yoke in such a condition that steering control is adversely affected (2.2.2 (d) (ii)) | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Rear reflector reflecting white to the rear (4.8.2 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Headlamp lens seriously defective loose (4.1.1 (b) (ii)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Riders seat insecure inc rear mudguard fowling rear wheel (6.2.5 (a) (ii)) | 1 |
| Brake performance not tested front brake binding , rear brake in/op (1.2.1 (g)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Suspension arm pin or bush excessively worn swinging arm (5.3.4 (a) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy stiff (2.2.2 (f) (i)) | 1 |