Most common failures | No# failures |
---|
Headlamp aim out of alignment | 16 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Registration plate issues | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Brake cable has a significantly damaged outer casing. |3.2.A1b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Riders seat insecure |6.2.1a| | 2 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Nearside Rear Direction indicator missing |1.5.1a| | 2 |
Nearside Steering lock stop ineffective |2.1.3| | 2 |
Offside Steering lock stop ineffective |2.1.3| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Front Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Front Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
Front Brake cable has restricted free movement (1.1.15 (e)) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure VARIOUS PANLES (6.1.1 (b) (i)) | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Stop lamp affected by the operation of the horn |1.3.2| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Offside Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Front Steering lock stop missing |2.1.3| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front An item not tested |Manual| | 1 |
Nearside Steering lock stop missing |2.1.3| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Rear Brake cable excessively corroded |3.2.A1b| | 1 |
Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
An item not tested |Manual| | 1 |
Rear Position lamp switch faulty |1.1.4a| | 1 |
Nearside Brake lever cannot be released smoothly |3.1.3d| | 1 |
Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Centre Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Riders seat insecure |6.2.1a| | 1 |
Front Stop lamp missing |1.3.3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Brake lever mounting cracked |3.1.2c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Brake cable badly frayed |3.2.A1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Brake cable badly frayed |3.2.A1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |