| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Registration plate issues | 5 |
| Nearside Rear Direction indicators not working |1.5.1c| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Nearside Front Direction indicators not working |1.5.1c| | 4 |
| Horn not working |1.7.3a| | 3 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Registration plate lamp issues | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Offside Front Direction indicators not working |1.5.1c| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Nearside Front Direction indicator missing |1.5.1a| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) | 2 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Indicator switch defective |1.5.4| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Offside Rear All direction indicators not working O/S rear indicator not working. (4.4.1 (a) (ii)) | 1 |
| Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Front Upper Steering movement excessively notchy with the weight on the lower bearing (2.2.1a) | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d) | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Rear Suspension component pin or bush excessively worn engine suspension bushes worn with excessive free play (5.3.4 (a) (i)) | 1 |
| Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Fuel cap ineffective can not gain access to fuel cap (6.1.3 (b) (i)) | 1 |
| Stop lamp not working both front and rear controls (4.3.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Brake hose excessively twisted |3.2.B3a| | 1 |
| Front position lamp damaged and function impaired Flickering constantly |1.1.1b| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Stop lamp does not emit a steady light from front |1.3.1b| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Rear position lamp incorrect colour |1.1.2b| | 1 |
| Fuel cap sealing washer missing |7.2.2c| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Horn not working |1.7.3a| | 1 |
| Outer Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Rear suspension bearing has excessive free play Engine mounts |2.4.A2a|i|| | 1 |
| Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
| Front Forks excessively corroded (2.2.2 (d) (i)) | 1 |
| Rear Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i)) | 1 |
| Brake disc|s| cracked R/H side |3.2.A1g| | 1 |
| Front position lamp does not illuminate immediately when switched on R/H |1.1.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on R/H |1.1.3a| | 1 |
| Central Exhaust has part of the system missing gasket detreated downpipe to silencer |7.1.1a| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected Steering notch |2.2.2 |f| |ii|| | 1 |
| Suspension component pin or bush excessively worn Rear engine mounting / swingarm bearings |5.3.4 |a| |i|| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear Steering linkage has excessive free play |2.2.2| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Fuel pipe union leaking |7.2.1a| | 1 |
| Central Suspension arm pin or bush excessively worn swing arm bush (5.3.4 (a) (i)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort a pair of discs req linked |3.3.A1d| | 1 |
| Rear suspension bush has excessive free play swinging arm |2.4.A2a|i|| | 1 |
| Rear Brake lever has inadequate reserve travel brake lever |3.1.3b| | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Chain guard insecure |6.1.7 |i|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Headlamp aim beam image kick up to the offside Tape applied to lens |1.6| | 1 |
| Rear reflector on motorcycle missing new fitted |1.4.1| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Suspension component modified so the suspension is inoperative No movement. Pivot point possibly seized solid. (5.3.3 (c) (ii)) | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Central Front Lower Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Offside Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
| Fuel cap mounting flange/sealing method defective Cover opening lever siezed, unable to check cap. (7.2.2c) | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering Bake lever fouling mirror. (2.1.2a) | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Direction indicators affected by the operation of another lamp white light left front |1.5.1c| | 1 |
| Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on rear left |1.1.3a| | 1 |