Most common failures | No# failures |
---|
Headlamp aim out of alignment | 48 |
Exhaust is leaking and excessively noisey |7.1.1b| | 21 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 14 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 14 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 12 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear wheel insecure |4.2.3b| | 7 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Horn not working |1.7.3a| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp aim not tested |1.6| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Indicator switch defective |1.5.4| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Registration plate lamp issues | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 2 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear suspension bush has excessive free play engine mounts
|2.4.A2a|i|| | 1 |
Brake performance not tested |1.2.1 |g|| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Registration plate issues | 1 |
Offside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Fuel cap sealing washer missing |7.2.2c| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Steering headbearing excessively stiff or notchy excessively stiff (2.2.2 (f) (i)) | 1 |
Nearside Rear Road spring insecure |5.3.1 |a| |i|| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Brake performance not tested |3.3| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies control |1.3.1a| | 1 |
Riders seat insecure Does not fasten securely , lock missing |6.2.1a| | 1 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
An item not tested |Manual| | 1 |
Nearside Front Brake locking device missing |3.2.A1e| | 1 |
Offside Front Brake locking device missing |3.2.A1e| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
Central Rear Suspension arm attachment bracket/mounting insecure 3 bolts missing from suspension arm (5.3.3 (a) (i)) | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Front Wheel fixing missing (multiple fixings) (5.2.1 (a) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Front Brake performance not tested |3.3| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies Only one of 6 strip bulbs working |1.3.1a| | 1 |
Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp does not illuminate immediately a brake applies THREE out of five bulbs not working |1.3.1a| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Nearside Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front An item not tested |Manual| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Rear Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear Exhaust is leaking and excessively noisey silencer to pipe gasket missing replaced |7.1.1b| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Offside Rear Lower Rear reflector on motorcycle does not reflect squarely to the rear no rear reflector |1.4.1| | 1 |
Offside Rear Rear position lamp does not face the rear o/s rear position lamp very dim |1.1.1d| | 1 |
Centre Rear Stop lamp emits other than a steady red light number plate light not working |1.3.1b| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |